Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

Used: Beckman Avanti 30 High Speed Compact Refrigerated Benchtop Centrifuge 364104

Tested 21,000 rpm and Backed by our 90-Day Warranty

Quick Overview

Used - A pre-owned and tested instrument that may show signs of wear

U.S. & Canada Freight ($285) - Exclusive shipping to the U.S. and Canada. Freighted products below $1,500 are assigned this profile.

Backed by a 90-day Warranty - Your instrument works, or we repair, refund, or replace.
AdID: 15119

Availability: In stock


Fully-Functional High Speed Benchtop Centrifuge
in Good Condition and Guaranteed with 90-Day Warranty

A time-tested and proven high speed compact refrigerated benchtop centrifuge, this
Beckman Avanti 30 has been thoroughly inspected by our technical staff and tested
to confirm it reaches 21,000 rpm, with refrigeration holding at +2C during operation.
It was also successfully tested to 26,000 rpm, but that isnt pictured in the listing.

With our 90-day warranty and knowledgeable testing, you can buy with confidence
knowing youll get a fully-functional centrifuge that will work on day-one and will
be protected against any unexpected issues.

Want to add a rotor to your Avanti 30?

This centrifuge doesnt come with a rotor, but we do have at least one compatible
rotor in stock so please dont hesitate to contact us about adding a rotor to your

Excellent Rotor Chamber and Nice Centrifuge Exterior

The control panel, display, and rotor chamber of this centrifuge look great! For a
centrifuge of this age, the overall condition is astounding. It was clearly well cared
for and kept in a clean environment. There are a few scuffs around the edges and
spots of discoloration on the left side panel, but it still looks nice.

Inspected and Tested by our Centrifuge Specialist

Our technical staff inspected and tested this centrifuge, confirming it fully-functional
and guaranteeing it to hold a steady low temperature during operation at top speeds.
The refrigeration system holds the rotor chamber at +2C during operation at 21,000
rpm. It was also tested to 26,000 rpm, but that wasn't pictured in the listing.

Although this centrifuge wasnt tested to the maximum speed specification of 30,000
rpm, it should be able to handle that speed without a problem.

The following tests and services were performed:

- Tested centrifuge to 21,000 rpm and 26,000 rpm without issue
- Chamber temperature holds at +2C during operation at 21,000 rpm
- Centrifuge exterior and interior cleaned

From Experienced Centrifuge Dealer to your Facility

New Life Scientific is no stranger to centrifuges. Over the past four years we have
dealt in and worked on a wide variety of benchtop and floor centrifuges from the
top manufacturers, including Eppendorf, Beckman, and Sorvall/Thermo.

You can have confidence in our technical evaluations and our warranty knowing
that we have actual in-house technicians who inspect, test, service, and repair
centrifuges. After their examinations and being cleaned inside and out, they often
leave our shop meeting manufacturer specs.

When you buy from us, youre not just buying a centrifuge. You also gain a
resource for after-sales support for any questions or issues that may arise,
even after your warranty expires.

90-Day Warranty for your Peace-of-Mind

We realize that buying pre-owned can be unnerving, so we include a 90-day warranty
on our equipment to protect you against any equipment failure or defects. If anything
goes wrong, our in-house support is only a phone call away.




Mfg. Date



Avanti 30

Cat. No.


Serial No.


Maximum speed

30,000 rpm with fixed angle (F1202)

10,000 rpm with swinging bucket (S0410)

Maximum force

64,400 g with fixed angle (F1202)

10,730 g with swinging bucket (S0410)

Speed setting

Digital; 100 rpm increments

Speed display

Digital; 1 rpm increments

Speed control

Actual rotor speed is within 25 rpm of set speed

Set time

9 hr 59 min timer

Pulse button


Drive system

Brushless induction

Accel/Decel rates

10 independent profiles

Temperature setting range

-20 to +40C

Temperature operating range

+2 to +40C

Power requirements

208 V, 60 Hz, 12 A

Dimensions (W x D x H)

24 x 26 x 15 in. w/ door closed

24 x 26 x 33 in. w/ door open


86 kg (190 lbs)