Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

Beckman Coulter Allegra 6 Benchtop Centrifuge 366802 w/ GH-3.8 Rotor & Buckets

Tested 3,750 rpm. Rotor & Buckets. 90-Day Warranty.
AdID: 15043

Availability: In stock


Fully-Functional Beckman Benchtop Centrifuge
in Good Condition with Rotor & Buckets

90-Day Warranty Included

Every week here at the New Life Scientific tech shop, we are inspecting, testing,
and servicing benchtop centrifuges such as this Allegra 6, offering you a wide
variety of pre-owned centrifuges with a clear understanding of their condition
and functionality.

Our technician inspected and tested this centrifuge, confirming it to reach the
GH-3.8 swinging bucket rotor maximum speed of 3,750 rpm with no problem
This centrifuge has a maximum speed of 8,000 rpm when paired with a compatible
fixed-angle rotor.

Comes with Rotor & Buckets

- Beckman Coulter Allegra 6 Centrifuge
- Beckman Coulter GH-3.8 Swinging Bucket Rotor
- 4x Beckman GH 3.8 Swing Buckets
- Power Cable

Clean and in Good Physical Condition

The centrifuge exterior and rotor chamber are in good physical condition and have
been thoroughly cleaned. There is only minor wear and age on this centrifuge, with
just a few small cosmetic scuffs and scratches as shown in the photos.

Inspected and Tested by Centrifuge Specialist

Our technician tested this centrifuge to the maximum GH-3.8 swinging bucket rotor
speed of 3,750 rpm without issue. All settings, control panel, display, gas springs,
and door lock have been tested and verified fully-functional with no imbalances or
unusual noise during operation.

The following tests were performed:

- Tested centrifuge to swinging bucket rotor max speed 3,750 rpm
- All control panel dials and switches tested
- Digital readout is clear and bright
- High and Low brake tested
- Time tested
- Door lock tested
- Centrifuge housing cleaned

Experienced Centrifuge Dealer

New Life Scientific is no stranger to centrifuges. Over the past four years, we have
dealt in and worked on a wide variety of benchtop and floor centrifuges from the top
manufacturers, including Eppendorf, Beckman, and Sorvall/Thermo.

You can have confidence in our technical evaluations and our warranty knowing that
we have actual in-house technicians who inspect, test, service, and repair centrifuges.
After their examinations and being cleaned inside and out, they often leave our shop
meeting manufacturer specs.

When you buy from us, youre not just buying a centrifuge. You also gain a resource
for after-sales support for keeping your centrifuge running, even after your warranty

G-Forces are G-Forces Buy Pre-Owned

The g-forces the centrifuge exerts are just as real as those exerted by a new one.
Buying pre-owned can save you more than
70% of what you would have spent
buying new.

90-Day Warranty for your Peace-of-Mind

We realize that buying pre-owned can be unnerving, so we include a 90-day warranty
on our equipment to protect you against any equipment failure or defects. If anything
goes wrong, our in-house support is only a phone call away.

Compatible Rotors

- GH-3.8A w/ 4 x 750 mL/192 mL max capacity (GS6-TB-017)
- GH-3.8B w/ 4 x 750 mL/192 mL max capacity (GS6-TB-003)
- PTS-2000 w/ 4 x 192 mL max capacity (SP-TB-008)
- GH-4.7 w/ 4 x 250 mL max capacity (GS-TB-024)
- GA-6 35 Fixed-Angle w/ 6 x 250 mL max capacity (GS-TB-023)



Beckman Coulter

Mfg. Date



Allegra 6

Cat. No.


Serial No.


Max Capacity

4x 750 mL

Maximum Speed

8,000 rpm (fixed angle)
4,730 rpm (swinging bucket)

Speed Control

30 rpm of set speed

Accel/Decel Rates

1 / 3

Refrigeration System


Drive Type Cooling

Direct Drive with replaceable brushes

Ambient Temperature Range

10C to 35C

Ambient Temperature Range for optimum operation

10C to 25C

Timed Run

0 to 30 min timer hold


120 V, 8 A, 60 Hz

Dimensions (W x D x H)

21.5 x 25.5 x 16 in


51.7 kg (114 lb)