Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.

0

Welcome to our online store!

Beckman Coulter Allegra X-22R Benchtop Centrifuge 392187 w/ SX4250 Rotor

Fully-functional and Protected by our 90-Day Warranty
$2,999.98
AdID: 15408

Availability: In stock

Details

Fully-Functional Beckman Refrigerated Benchtop
Centrifuge in Good Condition with Rotor

Supported by our 90-Day Warranty

Every week here at the New Life Scientific tech shop, we are inspecting, testing,
and servicing benchtop centrifuges such as this Allegra X-22R, offering you a wide
variety of pre-owned centrifuges with a clear understanding of their condition and
functionality.


Our technician inspected and tested this centrifuge, confirming it to reach the
SX4250 swinging bucket rotor maximum speed of 4,500 rpm with no problem
.
This centrifuge has a maximum speed of 15,500 rpm when paired with a compatible
fixed-angle rotor.


Comes with Swinging Bucket Rotor

- Beckman Coulter Allegra X-22R Centrifuge
- Beckman Coulter SX4250 Swinging Bucket Rotor
- Power Cable

Manufactured 2009 - Clean and in Good Physical Condition

The centrifuge exterior and rotor chamber are in good physical condition and
have been thoroughly cleaned. There is only some minor wear and age on this
centrifuge, with a few scratches on the top of the lid as shown in the photos.


Inspected and Tested by Centrifuge Specialist

Our technician tested this centrifuge to the maximum SX4250 swinging bucket
rotor speed of 4,500 rpm without issue. All settings, control panel, display, gas
springs, and door lock have been tested and verified fully-functional with no
imbalances or unusual noise during operation.


The following tests were performed:

- Tested to swinging bucket rotor max speed of 4,500 rpm
- Refrigeration holds below 0°C during operation
- All control panel buttons tested
- Digital readout is clear and bright
- Accel/Decel and Fast Stop tested
- Time tested
- Door lock tested
- Centrifuge housing cleaned

Experienced Centrifuge Dealer

New Life Scientific is no stranger to centrifuges. Over the past four years, we
have dealt in and worked on a wide variety of benchtop and floor centrifuges
from the top manufacturers, including Eppendorf, Beckman, and Sorvall/Thermo.


You can have confidence in our technical evaluations and our warranty knowing
that we have actual in-house technicians who inspect, test, service, and repair
centrifuges. After their examinations and being cleaned inside and out, they
often leave our shop meeting manufacturer specs.


When you buy from us, you’re not just buying a centrifuge. You also gain a
resource for after-sales support for keeping your centrifuge running, even
after your warranty expires.


90-Day Warranty for your Peace-of-Mind

We realize that buying pre-owned can be unnerving, so we include a 90-day
warranty on our equipment to protect you against any equipment failure or
defects. If anything goes wrong, our in-house support is only a phone call away.


Compatible Rotors

Part No.

Description

RPM

292243

4 x 250 mL Swinging-bucket Rotor (SX4250)

4,500

361171

24 x 1.5 mL Fixed-angle Rotor (F2402H)

15,500

392274

30 x 1.5 mL Fixed-angle Rotor (FX301.5)

14,000

392271

24 x 1.5 mL Swinging-bucket Rotor (SX241.5)

14,000

364670

6 x 50 mL Conical Tube Fixed-angle Rotor (C0650)

9,500

364680

10 x 15 mL Conical Tube Fixed-angle Rotor (C1015)

9,500

364650

6 x 85 mL Fixed-angle Rotor (F0685)

10,000

364640

8 x 50 mL Fixed-angle Rotor (F0850)

10,000

361231

6 x 30 mL Fixed-angle Rotor (F0630)

15,300

361221

10 x 10 mL Fixed-angle Rotor (F1010)

15,300

361111

2 x 3 Microplate Rotor (S2096)

3,000


Specifications

Manufacturer

Beckman Coulter

Mfg. Date

October 30, 2009

Model

Allegra X-22R

Cat. No.

392187

Serial No.

ALB09L004

Set speed range

0 to 15,500 rpm or equivalent RCF

Set time

to 9 hr 59 min or continuous

Accel/Decel profiles

10/10

Temperature setting

-20 to +40°C

Operating range

2 to 40°C

Ambient temperature range

10°C to 35°C

Power requirements

120 V, 10.5 A, 60 Hz

Dimensions (W x D x H)

18 x 28 x 14.5 in

Weight

78 kg (172 lb)