Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.

0

Welcome to our online store!

Used: Beckman J2-MI High Speed Refrigerated Floor Centrifuge 360321 w/ Warranty

Tested, Fully Functional and Backed by 90-Day Warranty

Quick Overview

Used - A pre-owned and tested product that may show signs of wear.

Flat-Rate Freight ($285) - The instrument is web-wrapped to a pallet with shrink-wrap.


Backed by a 90-Day Warranty - Your instrument works, or we repair, refund, or replace.

Compatible rotors/adapters can be found below.


$2,995.00
AdID: 14154

Availability: In stock

Details

Beckman J2-MI High Speed Refrigerated Floor Centrifuge in Good Condition and Tested to 21,000 RPM

A time-tested and proven high speed refrigerated floor centrifuge, this Beckman J2-MI has been thoroughly inspected by our technical staff and tested to confirm it reaches 21,000 rpm without issue. This centrifuge has also been proven to hold the rotor chamber at -12°C during a 15k RPM run.


With our 90-day warranty and knowledgeable testing, you can buy with confidence knowing you’ll get a fully-functional centrifuge that will work on day-one and will be protected against any unexpected issues.


Want to add a rotor to your J2-MI?

This centrifuge doesn’t come with a rotor, but we have some compatible rotors in stock so please don’t hesitate to contact us about adding a rotor to your purchase.


Reliable Floor Centrifuge in Good Condition for your Lab

This centrifuge has been proven time and time again through many years of service and it still hasn’t quit. Over the years it has developed a few minor cosmetic flaws, but none of it affects the performance. The rotor chamber has some small spots of discoloration and the centrifuge exterior has some scuffs and scratches, but that’s it -- nothing out of the ordinary.


Inspected and Tested by Technical Staff

Our technical staff inspected and tested this centrifuge, confirming it functional and guaranteeing it to hold a steady low temperature during operation at top speeds. The refrigeration system holds the rotor chamber at -12°C during operation at 15,000 rpm. It is configured for 208V power.


The following tests were performed:

- Tested centrifuge to 21,000 rpm without issue: PASSED
- Tested refrigeration during 15k RPM run, holding at -12°C: PASSED
- Tested lid lock and unlock: PASSED
- Tested rotor accel/decel: PASSED
- Tested control panel and display: PASSED

Recharged Refrigeration System

To ensure the refrigeration is reliable, our technician performs a full evacuation of the refrigeration system and refills it with new refrigerant. The recharge process involves the following:


- Vent system of refrigerant
- Apply 250-micron vacuum to test for leaks, remove debris, and boil off moisture in lines
- Nitrogen purge three times to clear lines for preventative maintenance
- Refill system with new refrigerant

From an Experienced Centrifuge Dealer to your Facility

New Life Scientific is no stranger to centrifuges. Over the past four years we have dealt in and worked on a wide variety of benchtop and floor centrifuges from the top manufacturers, including Eppendorf, Beckman, and Sorvall/Thermo.


You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair centrifuges. After their examinations and being cleaned inside and out, they often leave our shop meeting manufacturer specs.


When you buy from us, you’re not just buying a centrifuge. You also gain a resource for after-sales support for any questions or issues that may arise, even after your warranty expires.


Specifications

Manufacturer

Beckman

Model

J2-MI

Cat. No.

360321

Serial No.

JB1H08

Mfg. Year

2001

Power requirements

208 V, 60 Hz, 30 A

Dimensions (W x D x H)

28 x 32 x 50 in