Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

Used: Bioneer ExiPrep 16 Plus Automated Nucleic Acid Extraction DNA RNA Purification

Passes Self-tests & UV Works. Backed by 90-Day Warranty

Quick Overview

Used - A pre-owned and tested instrument that may show signs of wear

Free Parcel Shipping - All parcel (65 lbs and below) items are shipped for free unless the buyer chooses to expedite the shipping.

Backed by a 90-day Warranty - Your instrument works, or we repair, refund, or replace.
AdID: 14499

Availability: In stock


Bioneer ExiPrep 16 Plus Fully Automated Nucleic Acid Extraction System in Excellent
Condition - Manufactured in 2011

Fully automated, able to handle 16 samples at once, and designed with multiple features
to prevent sample contamination, this Bioneer ExiPrep 16 Plus system has been
inspected by our technician and is in excellent physical condition with little to no
visible wear both inside and out.

This system powers on, fully initializes, and passes all self-tests without issue. It
comes with everything needed for operation except 3 inexpensive accessories that
can be acquired from Bioneer for less than $300 total.

Initializes and Passes All Self-tests

Our technician inspected and tested this system, confirming it to fully initialize,
pass all self-tests, successfully run UV-sterilization mode and activate the tip eject
function without error. Testing was limited because we do not have all the accessories
or consumables to perform a complete run. The following tests were performed:

- Powered on without issue and booted to menu screen
- Navigated through touch screen interface menus
- Completed self-tests successfully
- UV-sterilization mode tested and working
- Tip eject function tested and working

Fully Supported by Bioneer

This ExiPrep 16 Plus system comes with everything you need for operation except
for 3 accessories that will need to be acquired from the manufacturer. We contacted
Bioneer and found that they fully support the ExiPrep 16 Plus system, offering all
the accessories and consumables you might need to operate this instrument. The
Bioneer support department responded within 1 business day and was very helpful.

The following items are included:

- Bioneer ExiPrep 16 Plus System
- ExiPrep 16 Plus User Manual ver. 1.01
- Certification of Quality
- Contamination Shield
- Disposable Tip Rack
- Elution Tube Rack
- Power Supply
- Power Cable

The following are the 3 missing accessories:

- Setup Tray (Cat.# A-5030-A2)
- 6-Hole Punch (Cat.# A-5030-A7)
- Waste Tray (Cat.# A-5030-A6)

We've included a print out of the quote Bioneer gave us for these 3 missing
accessories. The list prices of these accessories are also available on their website.

Automated 16 Sample Extraction

This nucleic acid automated extraction system can handle up to 16 samples at once
and comes pre-installed with optimized extraction protocols for many common
sample types. Some of the biological samples it can extract from include, but is
not limited to, tissue, whole blood, serum, plasma, swab, bacteria, and yeast.

Plus, UV-sterilization and a unique contamination shield help eliminate the possibility
of inter-assay cross contamination.




Mfg. Date



ExiPrep 16 Plus

Model No.


Serial No.


Number of samples


Operating temperature

15 - 30C

Operating humidity

20 - 80%, no condensation

Operating system


UV sterilization

5-minute cycle, 48.96 mJ/cm energy max 2

Heat block

40 - 95C

Electrical Requirements

100-240V, 50/60Hz
DC Input 24VDC---2.7A (60W)

Network support

TCP/IP protocol

User interface

320 x 240 touch screen graphic LCD, 18 bit color

Dimensions (W x D x H)

12.5 x 21 x 19.25 in


22 kg