Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.

0

Welcome to our online store!

Eppendorf 5702R Refrigerated Benchtop Centrifuge w/ A-4-38 Rotor & Buckets

Refurbished, Calibrated & Guaranteed by 90-Day Warranty
$2,999.55
AdID: 15721

Availability: In stock

Details

Eppendorf 5702R Refrigerated Benchtop Centrifuge in Good Condition with Rotor & Buckets - Refurbished & Calibrated

Every week here at the New Life Scientific tech shop, we are inspecting, testing, and servicing benchtop centrifuges such as this Eppendorf 5702R, offering you a wide variety of pre-owned centrifuges with a clear understanding of their condition and functionality.


Our technical staff inspected and tested this centrifuge, confirming it to reach the maximum speed of 4,400 rpm with no problem. Refrigeration cools to -9C when idle and holds at 0C during operation at maximum speed. Calibration was performed in June of 2019, making it not due for calibration again until June of 2020.


Comes with Swinging Bucket Rotor & Buckets

- Eppendorf 5702R Benchtop Centrifuge
- Eppendorf A-4-38 Swinging Bucket Rotor, Buckets, and Inserts
- Power Cable (230V)
- Calibration Record Document

In Good Condition - Looks Nice on the Benchtop!

Eppendorf benchtop centrifuges age very well and this centrifuge is no exception.


Its in good physical condition except for the scuffing around the feet, normal wear on the rotor chamber walls from use, and a chip out of the plug socket. As for the control panel, the display is clear and the buttons/dials respond well.


Tested to Maximum Speed by our Technical Staff

Our technician tested this centrifuge to the maximum speed of 4,400 rpm without issue. Refrigeration cools to -9C and holds at 0C when operating at maximum speed. Spinning, refrigeration, lid, digital display, and control panel have been tested and verified fully-functional.


The following tests were performed:

- Tested to maximum speed of 4,400 rpm
- Refrigeration cools to -9C when idle
- Refrigeration holds 0C at 4,400 rpm
- All control panel buttons tested
- Digital readout is clear and bright
- Door lock tested

The following services were performed:

- Compressor replaced
- Recharged refrigeration
- Centrifuge cleaned

From and Experienced Centrifuge Dealer to your Facility

New Life Scientific is no stranger to centrifuges. Over the past four years, we have dealt in and worked on a wide variety of benchtop and floor centrifuges from the top manufacturers, including Eppendorf, Beckman, and Sorvall/Thermo.


You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair centrifuges. After their examinations and being cleaned inside and out, they often leave our shop meeting manufacturer specs.


When you buy from us, you're not just buying a centrifuge. You also gain a resource for after-sales support for keeping your centrifuge running, even after your warranty expires.


Specifications

Manufacturer

Eppendorf

Model

5703

Part No.

5703 000.012

Serial No.

5703AO710143

Max. speed

4,400 rpm

Max. centrifugal acceleration

3,000 rcf

Max. load

4 x 90 ml

Max. kinetic energy

2,280 Nm

Permissible density of material being centrifuged

1.2 g/ml

Ambient temperature

+10 to 40C

Power requirements

230 V, 50-60 Hz, 1.7 A, 380 W

Dimensions (W x D x H)

14.5 x 23 x 10 in

Weight w/o Rotor

36 kg (79 lb)

Specifications

Condition Used
Condition Description This centrifuge is in great working condition and comes w/ rotor and 4 swing buckets. The compressor is a little noisy.