Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

Fisher Scientific Accuspin 1R Benchtop Centrifuge w/ Rotor Buckets & 2 Inserts

AdID: 14218

Availability: In stock


Fully Functional Centrifuge 6,000 RPM

With Rotor, Buckets and Adapters

Tested at Max 4,700 RPM With Rotor

This centrifuge is in great physical condition and reaches maximum rotor RPM, but doesnt quite reach the manufacturers cooling specs (recharging is needed to reach the max), though it is still cooling.

Included with the Centrifuge:

  • Fisher Scientific Rotor #3450, Max 4,300 RPM

- 4x Fisher Scientific Buckets #75003451, Max 4,000 RPM

- 2x Heraeus 10-Well Tube Rotor Adapters #54872 (13.7mm x 60.8mm)

Confirmed Technician Tested

Light maintenance was performed (replaced gas springs), refrigerant will need to be recharged to meet the maximum cooling. The centrifuge was run without a rotor and reached a temperature of 0C, with a rotor at max speed (4,700 rpm) it held a temperature of 11C (manufacture max should be under 4C).

Tested pulse mode, max and minimum acceleration and deceleration profiles. No unusual noises were heard or problems outside of the refrigeration. Light maintenance was performed (replaced gas springs), refrigerant will need to be recharged to meet the maximum cooling.

This is not a High-Priced Fancy-Nancy centrifuge but it will get the job done at a reasonable price. Functionally, this centrifuge is similar to a Legend RT centrifuge.

Experienced Centrifuge Dealer

New Life Scientific is no stranger to centrifuges. Over the past four years, we have dealt in and worked on a wide variety of benchtop and floor centrifuges from the top manufacturers, including Beckman, Sorvall/Dupont/Thermo, and Eppendorf.

You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair centrifuges. After their examinations and being cleaned inside and out, they often leave our shop meeting manufacturer specs.

When you buy from us, youre not just buying a centrifuge. You also gain a resource for after-sales support for any questions or issues that may arise, even after your warranty expires.

Includes a 90-Day Warranty

We realize that buying pre-owned can be unnerving and you want assurance in your purchase, so we include a 90-day warranty on our equipment to protect you against any equipment failure or defects.

Rotor Model





600 g


Mfg. Year

Fisher Scientific



Accuspin 1R

Serial Number


Power Requirement

120V, 60Hz, 11.5A, 1000W

Dimensions WxDxH

27.75 x 22.75 x 16 in