Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

New Brunswick Scientific Celligen Plus Bioreactor for Cell Culture/Fermentation

Replacement controller to keep your system running!

Quick Overview

Backed by a 90-Day Warranty - Your instrument works, or we repair, refund, or replace.

Used - A pre-owned and tested product that may show signs of wear.

Flat-Rate Freight ($285) - The instrument is web-wrapped to a pallet with shrink-wrap.

AdID: 16533

Availability: In stock


New Brunswick Celligen Plus Bioreactor for Batch/Continuous Cell Culture to Keep Your Legacy System Going

Tested by our NLS tech and backed by our 90-day warranty, this Celligen Plus controller is an easy affordable way to keep your legacy bioreactor system going if your controller went out, or a key step in building an affordable system. Its ready to take the place of an old controller that went kaput.

Verified Working Components - Guaranteed Functionality

Our technician Bart was hands on with this instrument, testing several components and finding them working properly. Although there are some elements that we couldn't test, we guarantee a functional system and consider it our responsibility to repair, replace, or refund should you run into any issues.

The following components/tests were performed:

- Agitation motor control test: PASSED
- Feed pumps tested to spin and stop when prompted: PASSED
- Flow meter solenoid clicks when system powers on: PASSED

The components Bart couldn't test were the cooling water pump and various sensors.

Some physical wear and flaws, but looks arent everything

Unsurprisingly for an instrument of its age, this Celligen Plus does have some visible signs of wear and aging. You'll also notice that part of the front label is torn on the instrument. However, there are no signs of concerning damage, and nothing that should affect the functionality of the instrument.

You Will Receive the Following:

- New Brunswick Cellgen Plus
- Dissolved Oxygen Analyzer
- 2x Dissolved Oxygen Analyzer Guide to Operations (one is M1176-0055/B, the other is M1176-0055/C)
- Rubber tube with clamp
- Power Cable

Requires Probes, Vessel, Tubing, and Motor

This is truly a barebones system, so you'll still need to source probes, a vessel, and a motor. You can check out our Bioreactor section to find various vessels to pair with this system.



New Brunswick Scientific


Celligen Plus

Mfg. No.


Serial No.


Power Requirements

120V, 50/60Hz, 1Ph, 1200VA