You Will Receive:
- BMG Labtech SPECTROstar Nano Microplate Reader
- x2 Power Cable
- 90-Day Warranty
Tested and Working
After its initial disinfection and inspection, our technicians tested this SPECTROstar Nano with the following results:
- Unit powers on and initializes successfully: PASSED
- Shaker works great: PASSED
- Microplate slide tray functions: PASSED
Specifications
|
Manufacturer
|
BMG Labtech
|
|
Model
|
SPECTROstar Nano
|
|
Serial No.
|
601-0400
|
|
Detection Mode
|
UV/Vis Absorbance Spectra
|
|
Measurement Modes
|
- Endpoint and Kinetic measurements - Well Scanning
|
|
Microplate Formats
|
- 6 to 1536-well plates, user definable
|
|
Microplate Carrier
|
- Auto lock microplate carrier
- Robot compatible
- All microplate formats up to 1536-well Microplates should adhere to the SBS specification and non-SBS formats should fit: (l x w x h) (mm) max: 128x86x20; min: length 124
|
|
Cuvette Port
|
- Cuvette port for cuvettes with 10 mm path length
- Micro cuvettes, Traycell compatible
- Beam height 8,5 mm
|
|
Light Source
|
- High energy xenon flash lamp
|
|
Detector
|
- Spectrometer with CCD
|
|
Spectral Range
|
- 220 - 1000 nm for ABS (Absorbance Spectrometer)
|
|
Sensitivity
|
- ABS with Spectrometer Selectable Spectral resolution: 1 nm, 2 nm, 5 nm, 10 nm OD range: 0 – 4 OD Accuracy: < 1% at 2 OD Precision: < 0.5% at 1 OD and < 0.8% at 2 OD
|
|
Read Times
|
- Full spectrum from 220 to 1000 nm in less than 1 sec/well
|
|
Shaking
|
- Linear, orbital, and double-orbital with user-definable time and speed
|
|
Incubation
|
+3°C above ambient up to 45°C for microplate and cuvette
|
|
Software
|
- Multi-user Reader Control and MARS Data Analysis Software included
|
|
Computer Interface
|
- USB 2.0, compatible to USB 1.1
|
|
Power Requirements
|
- External Power Supply: Type: XP Power AEF120PS24
- Input Voltage: 100 or 115 or 230 V, 50/60 Hz, auto ranging
- Output Voltage: 24V DC / 5A
|
|
Power Consumption
|
- Standby 0 W (<0,5W)
- Idle Mode 5 W
- Measuring 15 W - Maximum 60 W
|
|
Ambient Conditions
|
- Operating temperature: 15°C to 35°C
- Storage temperature: -10°C to 50°C
- Humidity of atmosphere: 20 % to 80 % - Non-condensing environment
|
|
Instrument Conformity
|
- Over voltage category II;
- Contamination class II
- Protection class III
|
|
Dimensions (W x D x H)
|
14 x 19 x 6.5 in
|
|
Weight
|
11 kgs
|
|
Options
|
- Gas Vent: system to inject an atmosphere or to pull a vacuum into the reader
- External manual barcode reader - 1536 well format
- LVis Plate: microplate for low volume (2 µL) absorbance measurements and instrument performance testing
|
