BIAcore 2000 Automated Surface Plasmon Resonance System: For Parts or Repair
This BIAcore SPR system has been professionally inspected by our technical staff and found to be non-functional.
When powered on, the system does not initialize properly, leaving all the LEDs lit and the fan running. Successful initialization would leave only the "Ready" and "Sensor Chip" LEDs lit, with the "Temperature" LED flashing amber to indicate the heater is warming.
Additionally, the sensor chips get stuck when one attempts to remove them.
Aside from a bit of wear on the exterior, this SPR system is in good condition. The interior looks especially nice as it has no signs of past spillage or staining. Please review the photos to see more of the cosmetic condition.
|
Manufacturer
|
BIAcore
|
|
Model
|
BIAcore 2000
|
|
Code No.
|
BR-1002-25
|
|
Serial No.
|
33-1303-2455
|
|
Concentration Measurement
|
Four analysis times <15 minutes, precision ≤5% CV dose
|
|
High molecular weight analytes (10^4 - 10^6 g/mole)
|
Direct assay: typically 10^-5 - 10^-9 M
Sandwich assay: typically 10^-3 - 10^-11 M
|
|
Low molecule weight analytes (<5000 g/mole)
|
Inhibition assay: typically 10^-3 - 19^-9 M
|
|
Detection Unit
|
Light Source: LED
Wavelength: 760 nm
Band Width: <5 nm
Temperature Range: 4 - 40°C (not lower than 20°C below ambient temperature)
Temperature Equilibration Time:
- after 5°C step: typically <60 minutes
- after 10°C step: typically <120 minutes
|
|
Pump
|
Flow rate range: 1-5000ul/min (1-100 ul/min user-controlled)
Increments: Steps of 1ul/min
Flow rate accuracy: Flow rate precision: <1%
(1-100ul/min, liquid at 25°C)
Pressure range: <0.2 MPa
|
|
Autosampler
|
Dispensing volume range: 5 - 500ul (including air segment)
Increments: Steps of 1 ul/min
Accuracy: <1% deviation for volumes >= 50ul
Precision:
- 50ul: <0.4% CV
- 5ul: <2% CV
|
|
Autosampler capacity per rack
|
Microtitre plate: 96 (0.2 ml/well)
Rack Type A:
- 5 vials, diam. 16mm (4 ml)
- 12 vials, diam. 9 mm (1.5 ml)
- 40 vials, diam. 7 mm (0.7 ml)
Rack Type B: 60 vials, diam. 9 mm (1.5ml)
Rack Type C: 24 vials, diam. 10.8 mm (Eppendorf-type 1.5-2ml)
|
|
Dimensions (W x D x H)
|
30" x 14.5" x 24"
|
|
Power Specifications
|
100-120V/220-240V, 47-63Hz, 580VA Max
|
For Parts or Repair - Non-functional, but may be a great source of spare parts.
U.S. & Canada Freight ($285) - Exclusive shipping to the U.S. and Canada. Freighted products below $1,500 are assigned this profile.
