For Parts or Repair, Getinge HS-22 K7 Steam
Sterilizer in Good Physical Condition
Safe, cost-effective solution for steam sterilization of tools in the healthcare
sector, this Getinge HS-22 K7 steam sterilizer is in good physical condition and
has been thoroughly inspected by our technician and tested to confirm it heats
to temperature and performs the sterilization run without error. However, this
system is no longer in this functional state because parts were removed to
repair another sterilizer.
After replacing the display screen, wiring connector, and connector on the
mainboard, this sterilizer should once again be a functional system. Mainboard
may not be functional and could need replacing.
Our technician inspected and tested this steam sterilizer, confirming it to heat
up and perform sterilization without error, remaining water was pumped back
into the reservoir. However, a few parts were removed and would need to be
replaced to bring this system back to a functional state.
The following is included with this system:
- Getinge HS-22 K7 Steam Sterilizer
- Tray
- Extra reservoir
- Extra control panel overlay
Specifications
Manufacturer |
Getinge |
Mfg. Date |
August 2007 |
Model |
HS-22 K7 |
Part No. |
978047501 c |
Serial No. |
07343776 |
Chamber volume |
20 L |
Max load |
7 Kg |
Temperature |
126C |
Feed water quality |
Distilled, R/O or deionized |
Feed water temperature |
5 to 40C |
Feed water pressure |
0.5 Bar |
Water consumption during steam generation |
10 to 100 ml |
Water consumption / process |
Approx. 0.2-0.4 liters |
Voltage |
208 V, 60 Hz, 10 A |
Total wattage |
2200 W |
Chamber dimensions (W x D x H) |
7.75 x 17.5 x 8.5 in |
Overall dimensions (W x D x H) |
20.75 x 24 x 18.75 in |
Weight |
80 Kg (176 lbs) |