- Microfluidics M110EH-30 Microfluidizer Processor
- Diamond F12Y 76 Micron Interaction Chamber (S#20677)
- Ceramic H30Z 200 Micron Ceramic Auxiliary Processing Module (AMP)(S#20676)
- 1 Liter Stainless Steel Reservoir
- Mechanical Product Pressure Gauge with Shutoff Valve
- Product Drip Pan
- Internal Heat Exchanger
- Preventative Maintenance Tool Kit
- Attached Power Cable
- 90-Day Warranty
Note: This system is almost unused. It was manufactured in 2022 and has 3,664 cycles (about 1 hour of use) on it from being tested. We can provide further assistance in acquiring more interaction chambers if needed.
After its initial disinfection and inspection, our technicians tested the Microfluidics M110EH-30 microfluidizer processor with the following results:
- Inspected and tightened all fittings: PASSED
- Tested and sterilized with denatured alcohol: PASSED
|
Manufacturer
|
Microfluidics
|
|
Model Name
|
M-110EH-30
|
|
Model No.
|
M110EH
|
|
Serial No.
|
M110EH-0778
|
|
Mfg. date
|
2022
|
|
Pressure range
|
up to 2068 bar (30,000 psi)
|
|
Flow rate
|
up to 330 mL/min @ 2068 bar (30,000 psi)
up to 450 mL/min @ 1725 bar (25,000 psi)
|
|
Feed temperature max.
|
75°C (165°F)
|
|
Holdup volume
|
100 mL
|
|
Compressed air
|
1 SCFM @ 3.4 bar (50 psi) with -18 to 37°C (0 to -35°F) max. dewpoint
|
|
Hydraulic oil heat exchanger cooling water
|
9.5 lpm (2.5 gpm) minimum @ 29°C (85°F) max
|
|
Product outlet heat exchanger cooling water
|
18.9 lpm (5 gpm) @ 16°C (65°F)
|
|
Minimum Sample Size
|
120 mL
|
|
Power rating
|
3 phase 60 Hz service, 208/230/460V, 3.7 KW (5 HP) (50 Hz European standard available)
|
|
Dimensions
|
33 x 34 x 58 in (84 x 87 x 148 cm)
|
|
Weight
|
450 lb (205 kg)
|
