Muromachi Kikai Model TMW-4012C Microwave Applicator Fixation System
This TMW-4012C is a fully-tested, warranty-backed microwave fixation system that will allow users to forgo traditional formalin fixation and avoid the noxious fumes and post-mortem enzyme interactions that accompany it.
With only 22 hours of usage logged, this system is still fully operational and in good condition. We expect you'll get a lot of use out of it yet.
Additionally, we have deemed it NLS Certified. Products tagged NLS Certified have been verified to perform to manufacturer specifications and are backed by a 120-day warranty.
After being cleaned and inspected, one of our senior technicians hooked up the fixation system's water and drainage lines and set about testing it. Below is a summary of the results of his testing.
- Cooling system was successfully running and preheat was set 60 minutes prior to operation: PASSED
- Once prepped, the fixation system heated a sample of water by 20°C in approximately 9 seconds: PASSED
Although there is some chipped paint around the control panel, this fixation system is in good condition overall. We recommend reviewing the photos for a full understanding of its condition.
- Muromachi Kikai Model TMW-4012C Microwave Fixation System
- Power Cable (NEMA 15-50P)
- Tubing
Notice: Holders and any other accessories must be acquired from the manufacturer.
New Life Scientific is an experienced scientific vendor with a history of positive customer experiences. You can have confidence in our technical evaluations knowing that we have in-house technicians who inspect, test, service, and repair the various instruments we receive.
After examination and thorough cleaning, products often leave our shop meeting manufacturer specifications. When you buy from New Life Scientific, you're free to contact us at any time for post-sale support -- even after your warranty expires.
Manufacturer
|
Muromachi
|
Model
|
TMW-4012C
|
Oscillator
|
Toshiba Magnetron 2M68(A)
|
Microwave Power Output
|
10 kW max.
|
Oscillation Frequency
|
2.450±30 MHz
|
Cooling Requirements
|
Water Cooling
|
Water Flow
|
3 liter/min
|
Exposure Time
|
0.01 - 2.99 sec (0.01 sec steps)
|
Pausing Time
|
3 min
|
Power Consumption
|
19kVa
|
Electrical Specifications
|
200/220VAC, 50/60Hz, 60A, Phase 3
|
Dimensions (W x D x H)
|
32 x 23 x 52 in.
|