2017 Agilent G1811A XY-AutoSampler Robotic & Accessories New/Out of Box
The Agilent Technologies XY autosampler (G1811A) is an XYZ robot which can automate sample handling procedures. It is controlled by Agilent ChemStation for UV-visible spectroscopy software of revision A.06.0x or higher.
To transfer analyte from the XY autosampler to the spectrophotometer, tubings, a flow cell and a peristaltic pump are needed (Not Included).
This is new, never been installed. Includes the sampler and acrylic shield and the accessory Kit223 19007007 are listed below.
- 4x 150422 RACK, CODE 21, 60 13 X 100MM, 9ML
- 1x 19041001 GENERIC TRAY, BLACK, 223
- 1x 19061040 PROBE HOLDER/GUIDE KIT, 1.5MM
- 1x 190710 TRAY SPACERS FOR INSTALLING PP TRAY
- 1x 1907141 SUPPORT BAR, MOUNTING RINSE STATION(S)
- 1x 27067272 PROBE,160x1.5x1.1MM CON BEV .45 ID TIP
- 1x 2707251 HP RINSE STATION, AGILENT
- 1x 2707254 TFE WASHER FOR RINSE STATION
- 1x 36083122 SERIAL CABLE, 9-PIN/25-PIN
- 1x 4011544082 SCR,PAN HD M4X8MM PH
- 1x 470321803 TBG,TYGON .156X .219, PER FT
- 1x 638308513 CONNECTOR, 8 TERMINAL BLOCK 45DEG
- 1x 638310513 CONNECTOR, 10 TERMINAL BLOCK 45DEG
- 1x 6730204007 FUSE, 2.0 AMP T-2 SLO-BLO
Since this was never installed before we figured we would leave that honor to whoever buys it.
- Digital manual is available upon request
New Life Scientific is an experienced scientific vendor with a history of positive customer experiences (just check out our reviews!). You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair the various instruments we receive.
After examination and thorough cleaning, products often leave our shop meeting manufacturer specs. When you buy from New Life Scientific, youre free to contact us at any time for after-sales support concerning any questions or issues that may arise, even after your warranty expires.
Manufacturer |
Agilent |
Mfg. Date |
10-2017 |
Model |
G1811A |
Serial Number |
US17000012 |
Power Requirements |
120V, 60Hz, 5.3A |
Dimensions (WxDxH)
Approx.
|
21.5 x 14.5 x 22 in. |