No Warranty - Sanyo MCO-19AIC (UV) CO2 Incubator w/ Shelves
Fully Tested and Working Without Issue
After its initial disinfection and inspection, our technicians tested this MCO-19AIC with the following results:
- Control panel works: PASSED
- CO2 sensor reached the setpoint (5% CO2): PASSED
- CO2 injection system injects until setpoint is reached: PASSED
- Heater holds at setpoint: PASSED
- Fan circulates air around the chamber: PASSED
- Temperature sensor works: PASSED
- UV Disinfecting Light functions properly: PASSED
- Sanyo MCO-19AIC (UV) CO2 Incubator
|
Manufacturer
|
Sanyo
|
|
Model
|
MCO-19AIC
|
|
Serial No.
|
11020120
|
|
External dimensions (W x D x H)
|
620 x 710 x 900 mm
|
|
Internal dimensions (W x D x H)
|
490 x 523x 665 mm
|
|
Interior volume
|
170 L
|
|
Access port
|
Inner diameter: 30 mm, On the back side
|
|
Insulation
|
Rigid polyurethane foamed-in place
|
|
Heating system
|
DHA system (heater jacket + air jacket system)
|
|
Heater
|
314 W
|
|
Humidifying system
|
Natural evaporation with humidifying pan
|
|
Temperature controller
|
PID control system
|
|
Temperature display
|
Digital display
|
|
CO2 controller
|
PID control system
|
|
CO2 density display
|
Digital display
|
|
Air circulation
|
Fan assisted
|
|
Temperature control range
|
+5°C above ambient to 50°C (in a 5°C to 35°C ambient).
|
|
Temperature control uniformity
|
±0.25°C in 25°C ambient, setting 37°C, 5% CO2, no load.
|
|
C02 control range and deviation
|
0% to 20%, ±0.15% in 25°C ambient, setting 37°C, 5% CO2, no load.
|
|
C02 sensor platform
|
Ceramic based, single beam Infrared sensor, with dual wavelength measurement for continuous auto-zero calibration
|
|
Air filter
|
0.3 Pm, Efficiency: 99.97% or higher
|
|
UV lamp
|
4W X 1 (ozone-free emission)
|
|
Water level sensor
|
Optical
|
|
Alarms
|
Automatic set temperature alarm, Automatic set CO2 density alarm, Upper limit temperature alarm, Door alarm, Low humidifying water alarm, UV lamp failure alarm (for UV equipped model only)
|
|
Remote alarm contacts
|
Allowable contact capacity: 30 VDC, 2 A
|
|
CO2 inlet connection
|
4 to 6 mm diameter tube
|
|
CO2 inlet pressure
|
0.03 MPaG (0.3 kgf/cm2 G, 4.3 psiG)
|
|
Weight
|
93 kg
|
