Sartorius Cubis MSU225S-100-DU Analytical Lab Balance
This lab balance is untested as we do not have the electronics module required for it to power on. It has been inspected and is in good condition with no damage, however, we believe that it will work without issue once you supply an electronics module.
We are backing this balance with a 90-day warranty.
With no damage and only wear typical amongst used equipment, this balance is in good condition overall. We recommend reviewing the photos.
Manufacturer
|
Sartorius/Cubis
|
Model
|
MSU225S-100-DU
|
Serial No.
|
33402361
|
Capacity x Readability
|
220 g x 0.01mg
|
Repeatability
|
0-60g +/- 0.015 mg / 60-110g +/- 0.25 mg
|
Linearity
|
+/- 0.1mg
|
Corner load (g) (Test Load [g])
|
+/- 0.15 mg (100 g)
|
Minimum sample weight (mg)
|
Typically 20 mg minimal initial weighing according to USP (United States Pharmacopoeia), USP31-NF26
|
Tare range
|
FULL to Capacity
|
Stabilization time (avg)
|
<2 second
|
Response time (avg)
|
<6 second
|
Sensitivity Drift
(10°-30°C/50°F-86°F
|
+/- 1 ppm / °C
|
Selectable Weight Units
|
g, kg, ct, lb, oz, ozt, tlh, tls, tlt, GN, dwt, mg, /lb, tlc, mom, K, tol, bat, MS and parts per pound
|
Display update
|
0.2-0.4 seconds (Depends on The Filter Level Selected)
|
Display
|
High resolution black and white 5.7" graphic display
|
Operation
|
Keys
|
Adjustment of the display and control unit
|
Display tilts; Control unit detachable
|
8 selectable application programs
|
Mass unit conversion by toggling, SQmin function for minimum sample weigh according to the USP, isoCAL automatic calibration/adjustment function, Density determination, Averaging (weigh averaging), Formulation,Weighing in percent, Counting
|
7 additional selectable application programs
|
Customized identification, Statistics, Calculation, Time-Controlled Functions, Totalizing, Second tare memory, Over/ under checkweighing
|
Dimensions (W x D x H)
|
Weighing pan: 3.3 x 3.3 in. Entire unit: 9.8 x 16.1 x 14.6 in.
|
Power requirements
|
120VAC
|