Distek Model 2500 Water Bath Dissolution Testing System in Good Condition with 7 1000mL Vessels
This Distek 2500 dissolution testing system has been inspected and tested by our technical staff, finding the system to fully-initialize, able run the stirrers and pump (pump not included).
There are a few issues with this instrument worth mentioning: during testing an issue with touchscreen touch accuracy was found, as well as an error that we believe may only be due to the the faulty pump which we have chosen to exclude from the listing.
To be fully-operational, this system requires a Distek TCS-0500 pump and temperature probe which is not included in this listing. This system is protected by a 90-day warranty in case a new pump doesn't solve the problem we experienced in testing.
During testing, this system raised an error stating that the bridge control is overheating. This problem will likely be fixed by adding a new pump, but there's also a slim chance that a communication cable or the bridge board is the origin of the problem.
Our technical staff tested the following:
- System initialization: PASSED
- Stirrers and pump (pump not included): PASSED
- Check water bath base lights: PASSED
- Successfully navigated menu with touchscreen: PASSED*
*The touchscreen may have some dead spots because, even after calibration, it was not as accurate as it should be.
Notice: In order to do batch runs and see the temperature reading on the screen, an OEM pump (Distek TCS-0500) is required. You will need to acquire this item separately.
This system is in good condition overall except for a small chip in the lip of one of the vessels and a crack in the plastic tub that does not leak. However, neither of these blemishes affect functionality and the rest of the system was maintained quite well.
Please review the photos for more details. We have taken high quality pictures of this system for you to inspect.
New Life Scientific is an experienced scientific vendor with a history of positive customer experiences. You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair the various instruments we receive.
After examination and thorough cleaning, products often leave our shop meeting manufacturer specs. When you buy from New Life Scientific, youre free to contact us at any time for after-sales support concerning any questions or issues that may arise, even after your warranty expires.
Manufacturer |
Distek |
Model |
2500 |
Serial No. |
2501434 |
Mfg. Date |
2015 |
Dissolution Vessels |
Six Vessels Standard (7 or 8 Optional) |
Volume |
25 - 4000 mL (Volumes below 300 mL Require Low Volume Kit) |
Water Bath |
One Piece Molded Acrylic |
RPM Control Range |
25 - 300 RPM, Digitally Controlled, Closed Loop |
RPM Resolution |
0.1 RPM |
RPM Accuracy |
1 RPM up to 100 RPM and 1% >100 RPM |
Motor |
High Torque, Permanent Magnet |
Vessel Temperature Control |
Ambient to 55C, TCS-0500 Thermocirculator |
Temperature Resolution |
0.01C |
Temperature Accuracy |
0.25C |
Shaft Wobble |
Less than 0.010 / 0.254 mm (Total Indicator Runout) |
Lab Temperature Min/Max |
20C / 25C |
Lab Humidity Min/Max |
20% / 80% Relative Humidity |
Display |
5.7" Color Touch Screen |
User Management |
Manage up to 50 Users with Multiple Access Levels |
Program Modes |
- Manual
- Automatic (Up to 100 Pre-Programmed Methods)
- Distek EVO 4300, Eclipse 5300, Opt-Diss 405, Opt-Diss 410
|
Interface Ports |
USB, Ethernet, RS-232, RS-485 |
Construction Materials |
Cast Aluminum, Stainless Steel, Engineered Plastic |
Dimensions (W x D x H) |
27.5" x 19.5" x 38.5" (70 cm x 50 cm x 98 cm) |
Weight |
80 lbs. (36 kg) |
Electrical Power |
115V 15V 50/60 Hz 10A or 230V 15V 50/60 Hz 6A (Operating Voltage Pre-Set at Factory) |