Thermo Scientific Heraeus Cytoperm 2 CO2 Gassed Incubator: Tested & Working
Our technical staff inspected and tested this Heraeus Cytoperm 2 and confirmed it reaches manufacturer specification, albeit slowly. The incubator heats up to +37°C after about a day and holds there without issue. Given more time, it can also reach +50°C.
This CO2 incubator is in good cosmetic condition and bears only a few scuffs. We're confident it will look great in your lab.
To provide you with an extra layer of security, we're backing this incubator with a 90-day warranty so you're protected in the chance it malfunctions.
After its cleaning and inspection, our technical staff powered the incubator on and set it to warm to 37°C. It takes over 24 hours to reach this temperature but it holds at that temperature reliably. Given more time, the unit could reach +50°C.
Aside from a few light scuffs on the exterior panels, this incubator has been taken care of and remains in good cosmetic condition. Please review the photos to see more detail of the cosmetic condition.
- Thermo Scientific Heraeus Cytoperm 2 CO2 Gassed Incubator
- Bottle Turning Controller
- Attached Power Cable
- x4 Attached Communication Cables for the Bottle Turning Controller
The end user must supply racks and/or a complete set of bottle turners separately.
New Life Scientific is an experienced scientific vendor with a history of positive customer experiences. You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair the various instruments we receive.
After examination and thorough cleaning, products often leave our shop meeting manufacturer specs. When you buy from New Life Scientific, you’re free to contact us at any time for after-sales support concerning any questions or issues that may arise, even after your warranty expires.
Manufacturer
|
Thermo Scientific
|
Model
|
Heraeus Cytoperm 2
|
Order Code
|
50051691
|
Serial No.
|
97112707
|
Capacity
|
7.7 cu. ft. (220 L)
|
Data Output
|
RS-232
|
Chamber Material
|
Electropolished Stainless Steel
|
Temperature Range
|
+5°C to 50°C
|
Relative Humidity
|
90%, controllable
|
Humidity Source
|
External humidity reservoir
|
CO2 Sensor Technology
|
TC Sensor
|
Oxygen Control
|
Not Included
|
CO2 Concentration Range
|
0 to 20%
|
Electrical Specifications
|
120V, 50/60Hz, 8.3A, 1.0kW
|
Dimensions (W x D x H)
|
36.5" x 30" x 34"
|
Weight
|
235 lb
|
Backed by a 90-Day Warranty - Your instrument works, or we repair, refund, or replace.
Used - A pre-owned and tested product that may show signs of wear.
Flat-Rate Freight ($285) - The instrument is web-wrapped to a pallet with shrink-wrap.