SP Scientific GeneVac Rocket Centrifugal Evaporator in Excellent Condition and Manufactured in December 2015
Tested comprehensively here in our tech shop, this GeneVac Rocket evaporator is guaranteed to be fully functional. This used Rocket offers walk-away evaporation that rivals the performance of a brand new unit.
Our unit comes packaged with a six-flask rotor, rotor lid, and power cable. It does not include any vessels or a chiller. You will need to acquire those items separately.
We had the following results in testing:
- Successfully ran self-tests, including vacuum integrity test: PASSED
- Connected unit to chiller and found no leaks: PASSED
- Tested display, latch, and all buttons: PASSED
- Checked that amperage draw was appropriate: PASSED
- Checked strobe light: PASSED
In short, no problems were encountered in testing.
Aside from some very minor wear on top of the lid, this GeneVac Rocket is in excellent condition. We took care to inspect the vacuum seals and ensure they're all in good condition. We also repainted the exterior panels to give the system a fresh shine.
- SP Scientific GeneVac Rocket
- 6-vessel rotor*
- Rotor lid
- Power cable
*This rotor does not come with vessels. You will need to acquire those separately before you can use the rotor.
New Life Scientific is an experienced scientific vendor with a history of positive customer experiences. You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair the various instruments we receive.
After examination and thorough cleaning, products often leave our shop meeting manufacturer specs. When you buy from New Life Scientific, you’re free to contact us at any time for after-sales support concerning any questions or issues that may arise, even after your warranty expires.
|
Manufacturer
|
SP Scientific
|
|
Model
|
GeneVac Rocket
|
|
Model No.
|
RKTS-23050-SNW
|
|
Serial No.
|
RK0496
|
|
Mfg. Date
|
December 2015
|
|
Electrical Requirements
|
230V, 50Hz, 1150VA
|
|
Dimensions (W x D x H)
|
28.5 x 25.5 x 20.5"
|
|
Mechanical
|
|
Max rotor speed
|
1,800rpm
|
|
Max sample acceleration
|
700G
|
|
Drive system
|
Direct
|
|
Max rotor imbalance
|
40g
|
|
Weight (dry) approx.
|
75kg
|
|
Condenser
|
|
Type
|
Dual Glass Coil
|
|
Powered by
|
cold water/glycol mix
|
|
Maximum coolant pressure
|
7 bar (static)
|
|
Minimum flow rate
|
1 liter per minute
|
|
Maximum flow rate
|
2 liters per minute
|
|
Maximum coolant temp
|
15°C
|
|
Minimum coolant temp
|
-15°C (+5°C if solvent may freeze)
|
|
Solvent Level detection
|
Visual
|
|
Vacuum System
|
|
Inner chamber pressure
|
3-1000 mbar
|
|
Display resolution
|
0.1 mbar
|
|
Outer chamber pressure
|
3-1000 mbar
|
|
Display resolution
|
1 mbar
|
|
Vacuum control
|
Solenoid valve
|
|
Dri-Pure
|
Yes
|
|
Ultimate system vacuum
|
3mbar
|
|
Vacuum chamber water
|
Deionised: resistivity
50,000 to 1 megohm at pH >6.5 and particulate free. 250ml.
|
|
Vacuum Pump
|
|
Type
|
4 head diaphragm
|
|
Maximum vacuum
|
2mbar
|
|
Operating Environment
|
|
Ambient operating temp
|
15°C to 30°C
|
|
Relative humidity
|
10 - 60% (non-condensing)
|
|
Altitude
|
Sea level to 1,600m
|
|
Storage/Transporting Environment
|
|
Ambient temperature
|
-10°C to 40°C
|
|
Relative humidity
|
10 - 80% (non-condensing)
|
|
Altitude
|
Sea level to 12,000m
|
