Waters Autopure 2707 Autosampler in Good Condition
This Autopure 2707 autosampler has been inspected and tested with no issues found. After powering it on, the system initializes without issue. Smooth tray movement entering ready position.
- Waters Autopure 2707
- 2 Trays
- Bottle
- Power Cable
New Life Scientific is an experienced scientific vendor with a history of positive customer experiences. You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair the various instruments we receive.
After examination and thorough cleaning, products often leave our shop meeting manufacturer specs. When you buy from New Life Scientific, youre free to contact us at any time for after-sales support concerning any questions or issues that may arise, even after your warranty expires.
Manufacturer |
Waters |
Model |
Autopure 2707 |
Serial No. |
E10707020Z |
Power Specifications |
95-240VAC, 200VA, 50/60Hz |
Audible noise level |
<65 dBA |
Working temperature |
10 to 40 C (indoor use only) |
Storage temperature |
-25 to +60 C |
Humidity |
20% to 80% RH |
Safety and EMC compatibility |
According to EC-directives; CSA (UL) approved |
Installation class |
II |
Pollution degree |
2 |
Altitude |
Up to 2000 m |
Dimensions |
Without thermal control: Without thermal control: |
Height: 36.0 cm (14.2 in.) Height: 57.5 cm (22.6 in.) |
Depth: 51.0 cm (20.1 in.) Depth: 36.0 cm (14.2 in.) |
Width: 30.0 cm (11.8 in.) Width: 30.0 cm (11.8 in.) |
Weight |
Without thermal control: 19.0 kg (41.8 pounds) |
|
With thermal control: 21.0 kg (46.2 pounds) |
Max. weight that can be placed |
|
on top of 2707 |
65 kg (143 pounds) |
Power requirements |
95 to 240 VAC 10%; 50 to 60 Hz; 200VA |
Viscosity range |
0.1 to 5.0 cP |
Back pressure (maximum) |
5000 psi (345 bar) |
SAMPLING |
|
Sample capacity |
2 microtiter plates according to SBS standards; 96-well high/low and 384-well low formats, |
|
48-vial or 12-vial trays; any combination of plates is allowed |
Vial/plate dimensions (includes cap) |
Maximum vial/plate height: 4.7 cm (1.9 in.) (includes septa or cap mat) |
Loop volumes |
5, 10, 20, 100 (standard), and 500 L; 10 mL loop (standard) for prep option |
Dispenser syringe |
500 L standard or 2500 L L (standard for prep option) |
Vial detection |
Missing vial/well plate detection by sensor |
Headspace pressure |
Built-in compressor, only used for vials with septa |
Switching time injection valve |
Electrically <100 msec |
Wash solvent |
Integrated wash solvent bottle |
Wetted parts in flow path |
SS316, PTFE, TEFZEL, PEEK, Glass |
Injection cycle time |
<60 s for one injection, 100 L including 300 L wash |