Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.

0

Welcome to our online store!

Sartorius BIOSTAT B-DCU DCU Control Tower Fermentor Bioreactor Cell Culture

Inspected and Tested. Protected by our 90-Day Warranty.
$19,995.99
AdID: 15415

Availability: In stock

Details

Sartorius Fermentor Bioreactor System with Control
Tower and 4 Supply Towers all in Good Condition -
Tested by our Technical Staff

Protected by our 90-Day Warranty

Tested by our technicians and backed by our 90-day warranty and support, this 2005
model Sartorius bioreactor is a hard to find instrument on the used market, and certainly
more attractive than the numerous 1990's model bioreactors you'll find littering the
internet.


This BIOSTAT system comes with the DCU tower and 4 supply towers, all of which are
in good physical condition, and include all the necessary cabling to connect them.


Clean Bioreactor System in Good Physical Condition

The durable stainless steel housing of this BIOSTAT B-DCU system is clean and in good
physical condition, showing only some minor wear from use. The DCU touch screen is
bright and responsive, providing easy control over the supply towers and the agitation
motors.


Inspected and Tested by our Technical Staff

Our technician inspected BIOSTAT B-DCU system and tested it to confirm all the towers
power on and initialize without issue, agitation motors work, peristaltic pumps work,
and the interface touch panel works.


There is only one issue that was found by our technical staff. The fourth supply tower
doesn’t read the actual rpm of the agitation motor even though it appropriately turns
at the set speed. The tachometer does not read any revolutions.


Everything else functions normally.


The following tests were performed:

- Control and Supply Towers power on and initialize without issue
- Good communication between Control and Supply Towers
- Agitation motors work
- Peristaltic pumps work
- Touch panel interface is fast and responsive

Well Equipped Bioreactor Fermentor System for your Lab

Additional accessories you might need, such as culture vessels, will need to be acquired
separately. This BIOSTAT B-DCU
system includes the following:


- Sartorius DCU Control Tower
- 4x Sartorius BIOSTAT B-DCU Supply Tower
- 4x Agitation Motors
- 4x Heating Pads
- 4x Temperature Probes
- 4x PH Probe Cables
- 4x DO Cables
- Comm Cables
- 5x Power Cable

From Professional Dealer to your Facility

New Life Scientific is an experienced scientific vendor with a history of positive customer
experiences (just check out our eBay reputation!). You can have confidence in our technical
evaluations and our warranty knowing that we have actual in-house technicians who
inspect, test, service, and repair the various instruments we receive.


After examination and thorough cleaning, products often leave our shop meeting
manufacturer specs.


When you buy from New Life Scientific, you’re free to contact us at any time for
after-sales support concerning any questions or issues that may arise, even after
your warranty expires.


90-Day Warranty for your Peace-of-Mind

We realize that buying pre-owned can be unnerving, so we include a 90-day warranty
on our equipment to protect you against any equipment failure or defects. If anything
goes wrong, our in-house support is only a phone call away.


Specifications

Control Tower

Manufacturer

Sartorius

Mfg. Date

2005

Model

DCU Tower

Type No.

8847002

Serial No.

04909

Voltage

110/230V, 4A, 50/60Hz

Dimensions (W x D x H)

12 x 22 x 32 in


Supply Towers

Manufacturer

Sartorius

Mfg. Date

2005

Model

Supply Tower

Type No.

8847843

Serial No.

00953, 00955, 00956, 00957

Voltage

120V, 15A, 50/60Hz

Dimensions (W x D x H)

14 x 14 x 32 in