Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.

0

Welcome to our online store!

Used: Thermo Shandon Cryotome FSE Cryostat Microtome A78900104 w/ Warranty

Meets Manufacturer Specs. Backed by 90-Day Warranty.

Quick Overview

Used - A pre-owned and tested instrument that may show signs of wear.

Flat-Rate Freight ($285) - The instrument is web-wrapped to a pallet with shrink-wrap.

<img src="http://hosting.kyozou.com/nls/Pictures/warranty_banner.jpg />

Backed by a 90-day Warranty - Your instrument works, or we repair, refund, or replace.
$4,599.95
AdID: 16009

Availability: In stock

Details

Thermo Shandon Cryotome FSE in Good Condition - Meets All Manufacturer Specifications

This Thermo Shandon Cryotome FSE has been thoroughly inspected and tested by our technician, confirming the chamber to reach -35°C in just two hours, the cryobar to reach -60°C, and the specimen head to reach -45°C, thus meeting manufacturer specifications across the board.


This cryostat is in good physical condition with smooth handwheel and knife assembly operation. Please note that the lid was replaced with the lid from a Cryotome FE, but this instrument is a Cryotome FSE.


A high-profile knife holder assembly, 2 specimen discs, a specimen disk tool, heat extractor, and power cable are included.


All Components Professionally Inspected and Tested

Our technician tested each component of this cryotome, from refrigeration all the way down to the micron selector. No feature is too small for our technicians to inspect and test. We guarantee this cryotome fully-functional and ready for operation the day you receive it.


    - Handwheel and knife assembly operation is smooth
    - Touchscreen interface is responsive and bright
    - Specimen travel and micron selector tested
    - Chamber lamp tested


Chamber, Cryobar, and Specimen Cooling Nicely

After lubricating the instrument to ensure smooth operation, we thoroughly tested this system to ensure the refrigeration is operating at manufacturer specification. The cryobar, chamber, and specimen cooling on this cryostat have been confirmed all either meet or exceed manufacturer specifications.


    - Chamber temperature tested to -35°C in 2 hours
    - Cryobar temperature tested to -60°C
    - Specimen temperature tested to -45°C


Equipped and Ready for Operation in your Lab

This cryotome is clean and ready for tissue sectioning. Blades will need to be acquired separately. The following is included:


    - High-profile knife assembly
    - x2 Specimen discs
    - Specimen disc tool
    - Heat extractor
    - Power cable

From a Professional Dealer to Your Lab

New Life Scientific is an experienced scientific vendor with a history of positive customer experiences. You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair the various instruments we receive.


After examination and thorough cleaning, products often leave our shop meeting manufacturer specs. When you buy from New Life Scientific, you’re free to contact us at any time for after-sales support concerning any questions or issues that may arise, even after your warranty expires.


Specifications

Manufacturer

Thermo Shandon

Model

Cryotome FSE

Part No.

A78900104

Serial No.

CC0023D0508

Total specimen advance

25 mm

Section thickness range

1 to 20 µm in increments of 1 µm
20 to 60 µm in increments of 5 µm

Cutting stroke

57 mm

Retraction

40 µm on upward stroke

Cryochamber

at an ambient temperature of ≤+25°C

Cryochamber temperature

0 to -35°C

Cryobar temperature

-55°C (minimum)(adjustable)

Specimen head temperature

0 to -40°C (performance restricted to ±10°C from chamber temp)

Power requirements

115 V, 60 Hz, 1800 VA

Dimensions (W x D x H)

33" x 29.5" x 47" (68.6 x 70 x 119.4 cm)

Weight

125 kg (275 lbs)