**Currently en route to our facility. It will take about 30 days to arrive, after which we will test and certify it.**
Included Items:
- Qiagen QIAcube Connect Nucleic Acid Purification System
- Qiagen Rotor
- Power Cable
Guaranteed to Perform Without Error
After your instrument arrives at our facility, it will be inspected and tested to verify it is free of malfunction. Unless stated otherwise, we are confident it will perform at manufacturer specifications. If you receive this instrument and it does not meet your required specifications, your purchase will be protected by our warranty.
Specifications
Manufacturer
|
Qiagen
|
Model
|
QIAcube Connect
|
Power Requirements
|
100–240 V AC, 50/60 Hz, 650 VA
|
Operating temperature
|
18 to 28ºC (64.4 to 82.4ºF)
|
Relative humidity
|
15–75% (non-condensing)
|
Dimensions
|
Dimensions (hood closed): width 65 cm (25.6 in.), height 58 cm (22.8 in.), depth 62 cm (24.4 in.); Dimensions (hood open): width 65 cm (25.6 in.), height 86 cm (34 in.), depth 62 cm (24.4 in.); Mass: QIAcube Connect: 71.5 kg (157.6 lb.), Accessories: 3 kg (6.6 lb.)
|
Centrifuge
|
10,640 rpm maximum, 12,000 x g maximum, swing-out rotor maximum 45°, 12 rotor positions
|
Shaker
|
Speed 100–2000 rpm, amplitude 2 mm, heating range of ambient temperature to 70°C (158°F), ramp-up time of <5 minutes from ambient temperature to 55°C (±3°C). Difference in the temperature detected by the internal sensor and the temperature of the sample liquid is approximately –2°C.
|
Pipetting system
|
Syringe size 1 ml, pipetting range 5–900 µl
|
Table capacity
|
Up to 12 samples per run
|