- Beckman Coulter Avanti J-20 XP Floor Centrifuge
- Power Cable
- 120-Day Warranty
After its initial disinfection and inspection, our technicians tested the Beckman Coulter Avanti J-20 XP floor centrifuge with the following results:
- Ran to 20,000 rpm: PASSED
- Refrigeration held at -10°C: PASSED
- No excessive noise or imbalance: PASSED
- Spun down properly: PASSED
- Performed inspection; no problems found: PASSED
This centrifuge was an elutriation model, but due to a hit on the top right side of the head that broke part of the board, all the elutriation parts were removed. After that, the speed sensor needed to be replaced, front head panel was replaced, and rear head panel was repaired.
Manufacturer
|
Beckman Coulter
|
Model
|
J-20 XP W/ELUT.
|
Cat. No.
|
368640
|
Serial No.
|
JXP01G12
|
Mfg. date
|
2001
|
Max. speed
|
26,000 rpm
|
Max. RCF
|
82,000 × g (JA 30.50 Ti Rotor)
|
Speed control
|
0-10,000 rpm: +/- 10 rpm 10,000-26,000 rpm: +/- 0.1% or equal
|
Refrigerant
|
R404A (Non CFC)
|
Maximum capacity
|
6 Liters
|
Single tube vol. range
|
1.5 mL - 1,000 mL
|
Set temperature range
|
-10° C to 40° C
|
Temperature control
|
± 2° C
|
User programs
|
30 programs, 2 steps (“I” version only)
|
Friction reduction system
|
Automatic
|
Max. heat dissipation to room
|
2.0 kw, 7,500 Btu/hr.
|
Noise level
|
57 dbA (0.91 M (3 ft.) in front of instrument at 20,000 rpm
|
Electrical requirements
|
200/208/240V, 50/60 Hz, 24A
|
Dimensions (W x D x H)
|
28 x 33.5 x 45.5 in
|
Weight
|
639.4 lbs (290 kg)
|