- Molecular Devices SpectraMax iD3 Multi-Mode Microplate Reader
- Power Cable
- 90-Day Warranty
Notice: This reader does not come with software, however, it can be operated without software. If you require software for your application, then it must be acquired separately.
After its initial disinfection and inspection, our technicians tested the Molecular Devices SpectraMax iD3 multi-mode microplate reader with the following results:
- Power and initialization: PASSED
- Plate loading and unloading: PASSED
- Ran standard ABS plate with repeatable results: PASSED
Notice: This reader has some minor cosmetic blemishes such as the light scratch on the touchscreen. Please review the available photos to see the physical condition before purchasing.
|
Manufacturer
|
Molecular Devices
|
|
Model
|
SpectraMax iD3
|
|
Serial No.
|
373704206
|
|
Mfg. date
|
2020-10-20
|
|
Plate formats
|
6, 12, 24, 48, 96, 384-well plates ANSI/SLAS conformant
Maximum height: 22 mm
|
|
Reading capability
|
Plates and cuvettes (with adapter) SpectraCuvette Adapters without a sticker have a plate height of 24 mm and cannot be used in the SpectraMax iD3 or SpectraMax iD5.
|
|
Robotic compatible
|
Yes
|
|
Shake
|
Orbital, double orbital, and linear
|
|
Temperature control
|
5°C (7.2°F) above ambient up to 66°C (150.8°F)
At temperatures ranging from 55°C (131°F) up to 66°C (150.8°F) ambient temperature of 25°C (77°F) is required.
|
|
Chamber temperature
|
<5°C ambient 25°C, under DutyCycle of: FL Top, 400ms/well, complete 384-wells, pause to achieve 10 min cycle time, eject, wait 30 sec, load.
|
|
Temperature uniformity
|
±0.75°C (1.35°F)
|
|
Temperature accuracy
|
±1°C (1.8°F) at 37°C (98.6°F) Set Point
|
|
Wavelength selection
|
1.0 nm increments
|
|
Ambient operating temperature
|
15°C to 40°C (59°F to 104°F)
|
|
Ambient storage temperature
|
-5°C to 40°C (23°F to 104°F) continuous;
-20°C to 50°C (-4°F to 122°F) transient (up to 10 hours)
|
|
Humidity restrictions
|
15% to 75% (non-condensing) at 30°C (86°F)
|
|
Altitude restrictions
|
Up to 2000 m (6562 ft)
|
|
Air pressure restrictions
|
54 kPa to 106 kPa (7.8 PSI to 15.4 PSI)
|
|
Sound pressure level
|
Maximum sound pressure: 73 dBA
Maximum sound pressure at one meter: 68 dBA
|
|
Installation category
|
II
|
|
Pollution degree
|
2
|
|
Data connection
|
One ethernet port
|
|
NFC antenna reader/writer
|
SANGOMA-MSMA 2V5 13.56 Mhz Multi Standard - Multi Antenna Reader/Writer
Contains FCC ID: 2AKHW-SANGMSMA4 Contains IC: 22202-SANGMSMA4
Changes or modifications made to this equipment not expressly approved by the party responsible for compliance may void the FCC authorization to operate this equipment.
|
|
Front clearance
|
4.33 in (11 cm) for plate drawer
|
|
Rear clearance
|
7.9 to 11.8 in (20 to 30 cm) between the rear of the instrument and the wall for ventilation and cable disconnects
|
|
Power rating
|
100-240V~, 50-60Hz, 2A
|
|
Dimensions (W x D x H)
|
20.94 x 23.54 x 15.79 in (53.2 x 59.8 x 40.1 cm)
|
|
Weight
|
88.1 lb (40 kg)
|
|
Read Mode
|
96-Wells
|
384-Well
|
|
Absorbance
|
0:25
|
1:25
|
|
Fluorescence Intensity* (10 msec integration time)
|
0:17
|
0:53
|
|
Luminescence (100 msec integration time 96-well, 40 msec integration time 384-well plate)
|
0:26
|
1:01
|
*For >65°C, minimum 25°C ambient temperature is required
|
Item
|
Description
|
|
Wavelength range
|
230 - 1000 nm
|
|
Wavelength selection
|
Monochromator tunable in 1 nm increments
|
|
Wavelength bandwidth
|
4.0 nm full width half maximum
|
|
Wavelength accuracy
|
±2.0 nm across wavelength range
|
|
Wavelength repeatability
|
±1.0 nm
|
|
Photometric range
|
0 - 4.0 OD
|
|
Photometric resolution
|
0.001 OD
|
|
Photometric accuracy
|
< ±0.010 OD ±1.0%, 0 - 3 OD VIS 0 - 3 OD UV
|
|
Photometric precision (repeatability)
|
< ±0.003 OD ±1.0%, 0 - 3 OD VIS 0 - 3 OD UV
|
|
Stray light
|
≤ 0.05% at 230 nm, 280 nm
|
|
Photometric stabilization
|
Instantaneous
|
|
Photometric drift
|
None (continuous referencing of monochromatic input)
|
|
Calibration
|
Automatic before every endpoint read and before the first kinetic read
|
|
Optical alignment
|
None required
|
|
Photodetectors
|
Silicon Photodiode
|
|
Item
|
Description
|
|
Wavelength range
|
EX 250 - 830 nm
EM 270 - 850 nm
|
|
Wavelength selection
|
Monochromators tunable in 1.0 nm increments
|
|
Wavelength accuracy
|
±2.0 nm
|
|
Wavelength repeatability
|
±1.0 nm
|
|
Bandwidth (EX/EM)
|
EX: 15 nm
EM: 25 nm
|
|
Number of excitation/emission pairs per plate
|
4
|
|
Dynamic range
|
>6 logs
|
|
Sensitivity top read mono*
|
Fluorescein
|
|
96-wells
|
4 pM - Guaranteed
1 pM - Optimized
|
|
384-wells
|
6 pM - Guaranteed
1 pM - Optimized
|
|
Sensitivity bottom read mono*
|
Fluorescein using glass bottom Greiner Sensoplate glass bottom multiwell plates
|
|
96-wells
|
10 pM - Guaranteed
2 pM - Optimized
|
|
384-wells
|
10 pM - Guaranteed
2.5 pM - Optimized
|
|
System validation
|
Self-calibrating with built-in fluorescence calibrators
|
|
Light source
|
High power xenon flash lamp
|
|
Average lamp lifetime
|
1 billion flashes or 2 years normal operation
|
|
Item
|
Description
|
|
Wavelength selection
|
Choice of simultaneous detection of All Wavelengths or selection in 1.0 nm increments
|
|
Wavelength range
|
300 - 850 nm
300 - 650 nm for “All Wavelengths” setting
|
|
Wavelength accuracy
|
±2.0 nm
|
|
Wavelength repeatability
|
±1.0 nm
|
|
Dynamic range
|
>7 decades
|
|
Sensitivity top read*
|
Perkin Elmer ATPlite 1step Luminescence Assay System
|
|
96-well
|
10 pM - Guaranteed
2 pM - Optimized
|
|
384-well
|
20 pM - Guaranteed
4 pM - Optimized
|
|
Crosstalk
|
<0.1% in white 96-well half area plate
<0.2% in white 384-well Costar small volume
|
*For properly functioning, operating, and maintained equipment.
Lower Costs: Save 30%–70% off standard retail prices on fully tested, pre-owned instruments.
Quality Equipment: Work with confidence knowing every instrument undergoes thorough testing for real-world lab environments.
Faster Delivery: Minimize downtime with in-stock inventory ready to ship immediately following a final quality inspection.
Dedicated Support: Experience customer service with guaranteed responses within one business day and full after-sale support.
Warranty Options: Purchase securely with warranty protection included on all equipment.
