- Teledyne Isco CombiFlash Rf 200 Automated Flash Chromatography System (625230012) with Solvent Lines
- Rack (18 x 150mm, 25ml)
- Silica Column (for testing only)
- Power Cable
- 90-Day Warranty
Notice: Consumables must be acquired separately. You may need more solvent lines depending on your application needs.
After its initial disinfection and inspection, our technicians tested the Teledyne Isco CombiFlash Rf 200 flash chromatography system with the following results:
- System initialization: PASSED
- Robotic arm homes during initialization: PASSED
- Touchscreen interface: PASSED
- Perform run to test absorbance: PASSED
- Liquid dispensing: PASSED
- Lamp power status: PASSED
Notice: This instrument has some cosmetic blemishes. Please review the available photos to see the physical condition before purchasing.
|
Manufacturer
|
Teledyne Isco
|
|
Model
|
CombiFlash RF 200
|
|
Serial No.
|
213D20243
|
|
Unit identification
|
625230012
|
|
FCC ID
|
PJMCPRM02
|
|
Flow rate range
|
1 to 200 mL/min
|
|
Flow rate accuracy (tested with water at 138 kPa or 20 psi)
|
+/- 5% (5-200 mL/min)
|
|
Pressure limit
|
Up to 1379 kPa (200 psi) (column dependent)
|
|
Pressure accuracy
|
5% of full scale
|
|
Gradient formation
|
Binary gradient from 1, 2, and 3, 4 solvent inlets. Solvent selection can be automatically controlled by the method.
|
|
Gradient accuracy
|
+/- 1% of full scale
|
|
Peak detection modes
|
Slope or threshold
|
|
Flow cell pathlength
|
0.1mm, +/- 25%
|
|
UV detection wavelength
|
200 to 400 nm, optional 200 to 800 nm UV-Vis
|
|
Monitor wavelength with purity ratio
|
200 to 400 nm, optional
200 to 800 nm UV-Vis
|
|
Wavelength accuracy
|
+/- 5 nm
|
|
Fraction accuracy
|
+/- [2mL + (flow rate / 60)]
|
|
Power options
|
Input voltage ranges from 100 to 240VAC, 50/60Hz, 2A maximum. Line cord is the disconnect device.
|
|
Line frequency
|
50/60Hz
|
|
Dimensions (W x D x H)
|
14 x 17 x 24 in
|
|
Weight
|
54 lb (24.5 kg)
|
