- SP Scientific VirTis 35L Ultra Super XL-70 Stoppering Freeze Dryer Lyophilizer (100006042) with Wizard 2.0 Control System
- 8 Shelves with Stoppering
- Vacuum Pump (New)
- Attached Main Power Cable
- 90-Day Warranty
After its initial disinfection and inspection, our technicians tested the SP Scientific VirTis 35L Ultra Super XL-70 stoppering freeze dryer with the following results:
- Calibrated temperature: PASSED
- Condenser temperature achieved -70°C: PASSED
- Shelf temperature achieved -60°C: PASSED
- Calibrated vacuum: PASSED
- Vacuum achieved 20mT: PASSED
- Reinsulated refrigeration lines.
- Installed new vacuum hoses.
- Added a new vacuum pump.
Shelf size (W x D): 10.8 in x 20.5 in (274.3 mm x 520.7 mm)
Shelf area: 12.24 ft2 (11,371 cm2)
For an additional cost, we can provide software for plotting the performance data of your freeze dryer. This software is not included and must be purchased separately. Please contact us for more information.
|
Manufacturer
|
SP Scientific
|
|
Model
|
35L Ultra Super XL-70
|
|
Part No.
|
100006042
|
|
Serial No.
|
310947
|
|
Mfg. date
|
1/31/2012
|
|
Shelf temperature control range
|
-40 to 65°C
|
|
Lowest shelf temperature (50Hz / 60Hz)
|
-57°C / -60°C
|
|
Shelf pull-down from 20°C to -40°C
|
≤ 90 minutes
|
|
Lowest condenser temperature (50Hz / 60 Hz)
|
-67°C / -70°C
|
|
Maximum condenser capacity
|
35 L
|
|
Condenser surface area
|
750 in2 (4,838 cm2)
|
|
Condenser pull-down from 20°C to -45°C
|
≤ 25 minutes
|
|
Maximum ice condensing capacity in 24 hours
|
≥ 20 L
|
|
Maximum deposition rate
|
0.83 L/hour
|
|
Number of compressors
|
1
|
|
Compressor horsepower
|
1.5 hp
|
|
System refrigerant
|
R245fa / R508B
|
|
Vacuum time to 100 mTorr
|
≤ 30 minutes
|
|
Vacuum rate of rise
|
≤ 30 mT/hour
|
|
Volume-based leak rate
|
≤ .0036 mbar L/sec
|
|
Lowest system vacuum
|
≤ 15 mT
|
|
Temperature uniformity
|
± 1.0°C
|
|
Construction
|
316L stainless steel shelves, product chamber and condenser chamber
|
|
Stoppering
|
Bottom-up hydraulic
|
|
Defrost type
|
Hot gas
|
|
Refrigerant type
|
CFC-free
|
|
Vapor port
|
6 in
|
|
Power rating
|
208/230VAC, 60Hz, 40A, 1Ph
|
|
Recommended outlet
|
NEMA 6-50R
|
|
Dimensions (W x D x H)
|
50 x 38.75 x 75.75 in (127 x 98 x 193 cm)
|
|
Minimum clearance
|
10 in (25.4 cm)
|
|
Weight
|
2,000 lb (909 kg)
|
Note: Performance specifications are based on SP Scientific test data from units operating at an ambient room temperature of approximately 20°C. SP recommends an optimum operating range of 15-25°C (59-77°F).
Note: SP recommends a 24-inch (61 cm) clearance around all sides of the unit for serviceability. If machines are placed side by side, increase the minimum clearance to 48 inches (121.9 cm)
|
Compressed air
|
80 psig
|
|
Ambient room temperature
|
20°C
|
|
Approx. peak heat generated
|
14,000 BTU/h
|
