- SP Industries VirTis Genesis 25EL Stoppering Tray Freeze Dryer (420327) with Optional Isolation Valve
- x2 Stoppering Shelves
- Vacuum Pump
- 1 Gallon Inland-19 Vacuum Pump Oil
- Manual Fluid Evacuator
- Power Cables
- 90-Day Warranty
After its initial disinfection and inspection, our technicians tested the SP Industries VirTis Genesis 25EL stoppering tray freeze dryer with the following results:
- Condenser temperature achieved -86°C: PASSED
- Shelf temperature achieved -70°C: PASSED
- Vacuum achieved 9mT: PASSED
- Reinsulated refrigeration lines.
- Replaced vacuum hoses.
- Flushed/filled vacuum pump.
Notice: This freeze dryer has some minor cosmetic blemishes. Please review the available photos to see the physical condition before purchasing.
|
Manufacturer
|
SP Industries
|
|
Model
|
Genesis 25 EL
|
|
Item No.
|
420327
|
|
Serial No.
|
214569
|
|
Mfg. date
|
07-12-02
|
|
Lowest shelf temperature (60 Hz)
|
≤ -70°C
|
|
Shelf temperature control range
|
-55 to 65°C
|
|
Shelf pull-down from 20 °C to -40 °C
|
≤ 30 minutes
|
|
Lowest condenser temperature (60 Hz)
|
≤ -85°C
|
|
Maximum condenser capacity
|
≥ 25 L
|
|
Condenser surface area
|
506 in2 (3264 cm2)
|
|
Condenser pull-down from 20°C to -45°C
|
≤ 25 minutes
|
|
Maximum ice condensing capacity in 24 hours
|
≥ 12 L
|
|
Maximum deposition rate
|
≥ 0.5 L/hour
|
|
Number of compressors
|
2
|
|
Compressor horsepower
|
1 hp, 1 hp
|
|
Vacuum time to 100 Millitorr
|
≤ 20 minutes
|
|
Vacuum rate of rise
|
≤ 30 mT/hour
|
|
Volume-based leak rate
|
≤ .0016 mbar-L/sec
|
|
Lowest system vacuum
|
≤ 15 mT
|
|
Temperature uniformity
|
± 1.0°C
|
|
Power rating
|
208-230V, 60Hz, 30A, 1Ph
|
|
Shelf dimensions (W x D)
|
10.75 x 20.5 in
|
|
Dimensions (W x D x H)
|
40 x 29 x 79 in
|
Note: Performance specifications are based on SP Scientific test data from units operating at an ambient room temperature of approximately 20°C. SP Scientific recommends an operating range of 15-25°C (59-77°F) and a Relative Humidity of ≤ 80% at sea level.
