- SP VirTis 24DX48 GPFD 25L XL-70 General Purpose Freeze Dryer Lyophilizer (449652)
- Trays
- SH Scientific SH-V60 Vacuum Pump (New)
- Vacuum Pump Power Cable
- Attached 208V Power Cable
- 90-Day Warranty
After its initial disinfection and inspection, our technicians tested the SP VirTis 24DX48 GPFD 25L XL-70 general purpose freeze dryer with the following results:
- Condenser temperature achieved -65°C: PASSED
- Shelf temperature achieved -35°C: PASSED
- Vacuum achieved 20mT: PASSED
Notice: This freeze dryer has some cosmetic blemishes. Please review the available photos to see the physical condition before purchasing.
- Reinsulated refrigeration lines.
- Replaced vacuum hoses.
Manufacturer
|
SP VirTis
|
Model
|
24DX48 GPFD 25L XL-70
|
Part No.
|
449652
|
Serial No.
|
301611
|
Temperature control range
|
-29 to 0°C
|
Lowest condenser temperature (50Hz/60Hz)
|
-67°C / -70°C
|
Maximum condenser capacity
|
25 L
|
Condenser surface area
|
506 in2 / 3264 cm2
|
Maximum ice condensing capacity in 24 hours
|
12 L
|
Maximum deposition rate
|
0.5 L/hour
|
Number of compressors
|
2
|
Compressor HP
|
0.5, 1.0
|
Approx. peak heat generated
|
7,200 BTU/h
|
System refrigerant (product chamber)
|
R-404A
|
System refrigerant (condenser)
|
R245fa, R508B
|
Vacuum time to 100 millitorr
|
≤ 20 minutes
|
Vacuum rate of rise
|
≤ 30 mT/hour
|
Lowest system vacuum
|
≤ 15 mT
|
Chamber dimensions (W x D)
|
23 x 47 in
|
Power rating
|
208/230V, 60Hz, 20A, 1Ph
|
Overall dimensions (W x D x H)
|
34 x 55 x 79 in (86 x 140 x 201 cm)
|
Weight
|
950 lb (432 kg)
|
Minimum clearance on all sides
|
10 in (25.4 cm)
|
Note: Performance specifications are based on SP Scientific test data from units operating at an ambient room temperature of approximately 20°C. SP Scientific recommends an operating range of 15-25 °C (59-77 °F).
Tray levels
|
Area (ft2/m2)
|
Spacing (in/mm)
|
Number of trays
|
2
|
13.2/1.23
|
7.81/198
|
4
|
3
|
18/1.67
|
6.5/165
|
6
|
4
|
23.3/2.18
|
5.13/130
|
8
|
5
|
29.8/2.78
|
3.85/98
|
10
|