- New Brunswick Scientific I Series 24R Benchtop Refrigerated Incubator Shaker (M1344-0004)
- Shaker Platform
- x3 Flask Clamps
- Power Cable
- 90-Day Warranty
Notice: We have more flask clamps available for an additional cost. Please contact us for more information about adding flask clamps to your purchase.
After its initial disinfection and inspection, our technicians tested the New Brunswick Scientific I Series 24R benchtop refrigerated incubator shaker with the following results:
- Calibrated shaker rpm: PASSED
- Ran shaker; no excessive noise or vibration: PASSED
- Calibrated temperature reading: PASSED
- Ran heating to 37°C setpoint; held steady: PASSED
- Ran cooling to 5°C setpoint; held steady: PASSED
- Installed a new belt.
- Repaired a crack in the shaker hood.
Notice: This shaker has some cosmetic blemishes. Please review the available photos to see the physical condition before purchasing.
|
Manufacturer
|
New Brunswick Scientific
|
|
Model
|
I Series 24R
|
|
Mfg. No.
|
M1344‒0004
|
|
Serial No.
|
SI24BK500207
|
|
Mfg. date
|
2012
|
|
Speed
|
25 - 500 rpm
|
|
Shaking control accuracy
|
±1 rpm
|
|
Shaking indication
|
Displayed in 1 rpm increments
|
|
Stroke/orbit
|
1.9 cm (¾ in) or 2.5 cm (1 in)
|
|
Temperature range
|
15°C below ambient temperature (minimum 4°C) to 60°C
|
|
Temperature control accuracy
|
±0.1°C at 37°C
|
|
Temperature indication
|
Displayed in 0.1°C increments
|
|
Heaters
|
Long-life, low-watt density resistance-type heater with high temperature thermostat
|
|
Altitude limit
|
2000 m
|
|
Alarms
|
Visible and audible warning indication when speed deviates more than 5 rpm or temperature more than 1°C from setpoints, and when timer has expired. Audible alarm can be muted
|
|
LED display
|
1.4 cm (9/16 in)
|
|
RS-232
|
Data logging
|
|
Setpoint retention
|
All setpoints and operating status are retained in non-volatile memory
|
|
Automatic restart
|
Automatic restart after power is restored, indicated by flashing display
|
|
Drive
|
Triple eccentric counterbalanced drive with nine permanently lubricated ball bearings
|
|
Drive motor
|
Solid-state brushless DC motor
|
|
Safety
|
Independent mechanical sensing tile switch shuts off the motor in an unbalanced condition
Drive interrupt shuts off power to shaker when door opens
Acceleration/deceleration circuit prevents sudden starts and stops, minimizing both splashing and mechanical damage
|
|
Power rating
|
120V, 60Hz, 1Ph
|
|
Power consumption
|
1500VA
|
|
Platform (W x D)
|
18 x 18 in (46 x 46 cm)
|
|
Dimensions (W x D x H)
|
22 x 30 x 24 in (55.8 x 76.2 x 61 cm)
|
|
Weight
|
184 lb (83.6 kg)
|
