- Microfluidics LM20 20K Electric Microfluidizer Processor
- Electronic User Interface (Digital Pressure Controls, Integrated Stroke Counter, Maintenance Reminders)
- Dyhydromatics 87.1L Diamond Interaction Chamber
- 300 mL Glass Reservoir
- Product Cooling Coil
- Product Cooling Coil Bath
- Recirculation Assembly
- Preventative Maintenance Toolbox
- Attached Power Cable NEMA L15-20
- 90-Day Warranty
After its initial disinfection and inspection, our technicians tested the Microfluidics LM20 20K electric microfluidizer processor with the following results:
- Electronic user interface: PASSED
- Verify highest pressure of 20,000 psi: PASSED
- Ran/sterilized with 2 liters of isopropyl alcohol: PASSED
- Check process pressure control valve: PASSED
- Check motor start/stop control: PASSED
- Check/replace plunger seal assembly: PASSED
- Clean and inspect plunger: PASSED
- Clean and inspect bearing isolator/o-rings: PASSED
- Clean and inspect/replace high pressure fittings: PASSED
- Clean and inspect/replace inlet check valve: PASSED
- Check/replace hydraulic oil and filter: PASSED
- Clean the hydraulic oil reservoir: PASSED
- Inspect/replace hydraulic cylinder seals: PASSED
- Backflush the interaction chamber: PASSED
Notice: This LM20 has only 31 hours of runtime recorded which is approximately 6,957 strokes.
Notice: This homogenizer has some minor cosmetic blemishes. Please review the available photos to see the physical condition before purchasing.
|
Manufacturer
|
Microfluidics
|
|
Model No.
|
LM20
|
|
Serial No.
|
LM20-0103
|
|
Mfg. year
|
2017
|
|
Pressure range
|
Up to 20,000 psi
|
|
Minimum sample size
|
14 ml
|
|
Flowrate range
|
60 ‒ 100 ml/min
|
|
Accumulator charge
|
1100 psi
|
|
Feed temperature
|
Maximum of 75°C (165°F)
|
|
Pump actuator
|
Electro-hydraulic
|
|
Noise level
|
<80 dB TWA
|
|
Power supply
|
208-230, 60Hz, 3Ph
|
|
Dimensions (W x D x H)
|
32 x 25 x 22 in
|
|
Weight
|
230 lb (104 kg)
|
