Microfluidics LM20 Electric Microfluidizer Processor High-Shear Homogenizer 230V

- Microfluidics LM20 Electric Microfluidizer Processor with Electronic User Interface
- H10Z 100 Micron Diamond Interaction Chamber (IXC)
- 300 mL Glass Reservoir
- Digital Pressure Control
- Cooling Coil and Bath
- Preventative Maintenance Toolkit
- Attached Power Cable with NEMA L15-20P Plug
- 90-Day Warranty

After its initial disinfection and inspection, our technicians tested the Microfluidics LM20 electric microfluidizer processor with the following results: 

- Cleaned and inspected liquid end: PASSED
- Ran and sterilized with 1 liter of isopropyl alcohol: PASSED
- Verify highest pressure of 30,000 psi: PASSED
- Check process pressure control valve: PASSED
- Check motor start/stop control: PASSED
- Check hydraulic oil heat exchanger: PASSED
- Check/replace plunger seal assembly: PASSED
- Clean and inspect plunger: PASSED
- Clean and inspect bearing isolator/Orings: PASSED
- Clean and inspect/replace high pressure fittings: PASSED
- Clean and inspect/replace inlet check valve: PASSED
- Clean and inspect/replace priming valve: PASSED
- Check/replace hydraulic oil and filter: PASSED
- Clean the hydraulic oil reservoir: PASSED
- Clean the hydraulic oil suction strainer: PASSED
- Inspect/replace hydraulic cylinder seals: PASSED
- Backflush the interaction chamber: PASSED

Notice: Please review the technician checklist in the product images to see more details of the inspection and testing performed.

Notice: The stroke counter total is 14,965 and the hour counter is at 24 hours. These counters indicate that this processor has seen minimal use.