- Microfluidics M110Y Microfluidizer Processor
- F20Y 75 Micron Ceramic Interaction Chamber
- H30Z 200 Micron Ceramic Auxiliary Process Module
- Chrome-Plated Plunger
- Pressure Transducer with Digital Readout
- Vertical Cooling Bath
- Air Hose
- Power Cable
- 90-Day Warranty
After its initial disinfection and inspection, our technicians tested the Microfluidics M110Y microfluidizer processor with the following results:
- Verify highest pressure: PASSED
- Ran/sterilized with 2 liters of isopropyl alcohol: PASSED
- Check process pressure control valve: PASSED
- Check motor start/stop control: PASSED
- Check/replace plunger seal assembly: PASSED
- Clean and inspect plunger: PASSED
- Clean and inspect bearing isolator/o-rings: PASSED
- Clean and inspect/replace high pressure fittings: PASSED
- Clean and inspect/replace inlet check valve: PASSED
- Clean and inspect/replace priming valve: PASSED
- Backflush the interaction chamber: PASSED
Notice: This homogenizer has some cosmetic blemishes. Please review the available photos to see the physical condition before purchasing.
|
Manufacturer
|
Microfluidics
|
|
Model No.
|
M110Y
|
|
Serial No.
|
95155B
|
|
Pressure range
|
Up to 23,000 psi (1,546 bar)
|
|
Minimum sample size
|
60 ml
|
|
Flowrate range
|
100 ‒ 500 ml/min
|
|
Pump actuator
|
Pneumatically driven
|
|
Air requirements
|
57 scfm @ 120 psi (27 l/s @ 8.3 bar)
|
|
Noise level
|
<80 dB TWA
|
|
Electrical power requirement*
|
85-260VAC, 50/60Hz, 5A
|
|
Dimensions (W x D x H)
|
13.62 x 18.49 x 29 in (35 x 47 x 74 cm)
|
|
Weight
|
55 lb (25 kg)
|
*Only required for the pressure transducer and display option.
