- Microfluidics M700 Microfluidizer Processor Production Scale Ultra High Shear Homogenizer (7125-30)
- F12Y-5 Diamond Interaction Chamber (S#11711)
- T60Z Ceramic Auxiliary Processing Module AMP (S#11712)
- Mechanical Stroke Counter
- Dynisco 1401 2-Probe Temperature Gauge
- Dynisco 1490 Pressure Gauge with Transducer
- Pneumatic Product Feed Pump with 200 Micron Strainer (can installed a different size according to your needs)
- Mechanic Pressure Gauge and Air Regulator
- Dual External Heat Exchanger
- Prime/Relief Valve
- Product Pressure Adjustment Valve
- Power Cabinet
- 90-Day Warranty
Note: This system has a stroke counter of 118,000 (about 40-80 hours of use). We can provide further assistance in acquiring more interaction chambers if needed.
After its initial disinfection and inspection, our technicians tested the Microfluidics M700 microfluidizer processor with the following results:
- Inspected and tightened all fittings: PASSED
- Tested and sterilized with denatured alcohol: PASSED
- Installed plumbing.
- Installed pressure gauge.
- Wired the panel to power and the machine to the panel.
Manufacturer
|
Microfluidics
|
Type
|
M700 Series
|
Model No.
|
7125-30
|
Serial No.
|
2007119
|
Mfg. date
|
2008
|
Pressure range
|
Up to 40,000 psi (2755 bar)
|
Flowrate @ 25 strokes/min
|
10K - 2.06 gpm (7.78 lpm) 20K - 1.05 gpm (3.96 lpm) 30K - 0.67 gpm (2.53 lpm)
|
Feed temperature
|
Maximum 165°F (75°C)
|
Utility requirements
|
Cooling water for hydraulic oil heat exchanger and process fluid heat exchanger, compressed air (50-150 psi 1 scfm@ 50 psi, pressure dew point of 0-35°F)
|
Power rating
|
3 phase electrical service, 208/230/380/460/575V 25 HP (18.5 kw)
|
Dimensions (W x D x H)
|
71 x 29 x 57 in (180 x 74 x 145 cm)
|
Weight
|
1,700 lb (765 kg)
|