- Microfluidics M-700 Microfluidizer Processor Production Scale High Shear Homogenizer (7250-20 PHB) - H10Z-15 Channel 100 Microns Diamond Interaction Chamber - T250Z 1,000 Micron Ceramic AMP - Quench Fluid Circulating System - Feed Pump - Power Cabinet - 90-Day Warranty
Note: This processor has 143 motor hours on it and a stroke counter of about 116,000. This indicates the processor has seen very little use since it was last serviced and is in excellent condition.
Not Included:
- Chiller
Fully Tested and Working Without Issue:
After its initial disinfection and inspection, our technicians tested the Microfluidics M-700 microfluidizer processor with the following results:
- Ran up to 21,000 psi with no leaks: PASSED - Tested and sterilized with denatured alcohol: PASSED
Notable Service Performed:
- Cleaned and flushed the system.
Specifications:
Manufacturer
Microfluidics
Type
M700 Series
Model No.
7250-20 PHB
Serial No.
7250-0077
Mfg. date
2018
Pressure range
Up to 20,000 psi (1379 bar)
Product flowrate
Up to 15.12 lpm (4.0 gpm)
Feed temperature
Maximum 165°F (75°C)
Utility requirements
Cooling water for hydraulic oil heat exchanger Cooling water for process fluid heat exchanger Compressed air for feed pump and cycling control switches requires 0.65 m3/min @ 6.2 bar (23 scfm @ 90 psi) minimum with -37°C to -18°C (-35°F to 0°F) dew point
Microfluidics M-700 Microfluidizer Processor Production Scale 7250-20 PHB
You Will Receive:
- Microfluidics M-700 Microfluidizer Processor Production Scale High Shear Homogenizer (7250-20 PHB) - H10Z-15 Channel 100 Microns Diamond Interaction Chamber - T250Z 1,000 Micron Ceramic AMP - Quench Fluid Circulating System - Feed Pump - Power Cabinet - 90-Day Warranty
Note: This processor has 143 motor hours on it and a stroke counter of about 116,000. This indicates the processor has seen very little use since it was last serviced and is in excellent condition.
Not Included:
- Chiller
Fully Tested and Working Without Issue:
After its initial disinfection and inspection, our technicians tested the Microfluidics M-700 microfluidizer processor with the following results:
- Ran up to 21,000 psi with no leaks: PASSED - Tested and sterilized with denatured alcohol: PASSED
Notable Service Performed:
- Cleaned and flushed the system.
Specifications:
Manufacturer
Microfluidics
Type
M700 Series
Model No.
7250-20 PHB
Serial No.
7250-0077
Mfg. date
2018
Pressure range
Up to 20,000 psi (1379 bar)
Product flowrate
Up to 15.12 lpm (4.0 gpm)
Feed temperature
Maximum 165°F (75°C)
Utility requirements
Cooling water for hydraulic oil heat exchanger Cooling water for process fluid heat exchanger Compressed air for feed pump and cycling control switches requires 0.65 m3/min @ 6.2 bar (23 scfm @ 90 psi) minimum with -37°C to -18°C (-35°F to 0°F) dew point