- Microfluidics MF110EH30K Microfluidizer Processor
- H10Z 100 Micron Diamond Interaction Chamber (IXC)
- H30Z 200 Micron Ceramic Auxiliary Processing Module (APM)
- 1 Liter Stainless Steel Reservoir with Stopper
- Manual Process Pressure Gauge
- Attached Power Cable
- 90-Day Warranty
After its initial disinfection and inspection, our technicians tested the Microfluidics MF110EH30K microfluidizer processor with the following results:
- Ran/sanitized with 2 liters of isopropyl alcohol: PASSED
- Verify maximum operating pressure of 30,000 psi: PASSED
- Tested flow rates: PASSED
- Check process pressure control valve: PASSED
- Check motor start/stop control: PASSED
- Check hydraulic oil heat exchanger: PASSED
- Check/replace plunger seal assembly: PASSED
- Clean and inspect plunger: PASSED
- Clean and inspect bearing isolator/o-rings: PASSED
- Clean and inspect/replace high pressure fittings: PASSED
- Clean and inspect/replace inlet check valve: PASSED
- Clean and inspect/replace priming valve: PASSED
- Check/replace hydraulic oil and filter: PASSED
- Inspect/replace hydraulic cylinder seals: PASSED
- Inspect/replace pneumatic switches: PASSED
- Backflush the interaction chamber: PASSED
Notice: Please review the technician checklist in the product images to see more details of the inspection and testing performed.
- Adjusted hydraulic compensator.
- Reconfigured for low voltage (230V).
- Replaced hydraulic oil and filter.
- Replaced plunger seal.
Manufacturer
|
Microfluidics
|
Model
|
M-110EH-30
|
Model No.
|
MF110EH30K
|
Serial No.
|
110EH-0568
|
Mfg. date
|
2017
|
Pressure range
|
up to 2068 bar (30,000 psi)
|
Flow rate
|
up to 330 mL/min @ 2068 bar (30,000 psi) up to 450 mL/min @ 1725 bar (25,000 psi)
|
Feed temperature max.
|
75°C (165°F)
|
Holdup volume
|
100 mL
|
Compressed air
|
1 SCFM @ 3.4 bar (50 psi) with -18 to 37°C (0 to -35°F) max. dewpoint
|
Hydraulic oil heat exchanger cooling water
|
9.5 lpm (2.5 gpm) minimum @ 29°C (85°F) max
|
Product outlet heat exchanger cooling water
|
18.9 lpm (5 gpm) @ 16°C (65°F)
|
Minimum Sample Size
|
120 mL
|
Power rating
|
3 phase 60 Hz service, 208/230/460V, 3.7 KW (5 HP) (50 Hz European standard available)
|
Dimensions
|
30 x 33 x 58 in (76.2 x 76.2 x 147.3 cm)
|
Weight
|
450 lb (205 kg)
|