- SP Scientific VirTis 25L Genesis EL-85° Stoppering Tray Pilot Freeze Dryer
- Computer with LyoS 2.0 Software
- Edwards nXDS15i Scroll Vacuum Pump
- Power Cables
- 90-Day Warranty
Note: This freeze dryer has a total system runtime of only 99 hours.
- 1 Year Extended Warranty
- Annual PM Service Visit: Preventative maintenance involves checking vacuum integrity and instrument calibration
- IQ/OQ Service: Installation Qualification and Operational Qualification Service Visit. This can be a requirement for any company that is producing products that fall under FDA Regulations.
- Acid Trap Installation: Necessary for applications that involve the processing of corrosive materials
Please contact us if you would like to know more about these service upgrades.
After its initial disinfection and inspection, our technicians tested the SP Scientific VirTis 25L Genesis EL-85° stoppering tray freeze dryer with the following results:
- Condenser temperature achieved -86°C: PASSED
- Shelf temperature achieved -74°C: PASSED
- Vacuum achieved 31mT: PASSED
|
Manufacturer
|
SP Scientific
|
|
Model
|
25L Genesis EL-85°
|
|
Part No.
|
100029132
|
|
Serial No.
|
328441
|
|
Shelf temperature control range
|
-55°C to 65°C
|
|
Lowest shelf temperature (50Hz/60Hz)
|
-67°C/-70°C
|
|
Lowest condenser temperature (50Hz/60Hz)
|
-82°C/-85°C
|
|
Maximum condenser capacity
|
≥ 25 liters
|
|
Condenser surface area
|
506 in2 (3,264 cm2)
|
|
Maximum ice condensing capacity in 24 hours
|
≥ 12 liters
|
|
Condenser pull-down from 20°C to -45°C
|
≤ 25 minutes or less
|
|
Shelf pull-down from 20°C to -40°C
|
≤ 30 minutes or less
|
|
Vacuum time to 100 millitorr
|
≤ 20 minutes or less
|
|
Vacuum rate of rise
|
≤ 30 mT/hour
|
|
Maximum deposition rate
|
≥ 0.5 L/hour
|
|
Number of compressors
|
2
|
|
Compressor horsepower
|
1 hp, 1 hp
|
|
Vacuum control ±5mTorr
|
50 to 500mTorr
|
|
Volume-based leak rate
|
≤ .0016 mbar L/sec
|
|
Lowest system vacuum
|
≤ 15 mT
|
|
Temperature uniformity
|
± 1.0°C
|
|
Power rating
|
208-230V, 60Hz, 30A, 1Ph
|
|
Shelf dimensions (W x D)
|
10.8 × 20.5 in (274.3 × 520.7 mm)
|
|
Dimensions (W x D x H)
|
40 x 30 x 80 in (101.6 x 76.2 x 203.2 cm)
|
|
Weight
|
800 lb
|
|
Minimum clearance on all sides
|
10 in
|
Note: Performance specifications are based on SP test data from units operating at an ambient room temperature of approximately 20°C. SP recommends an optimum operating range of 15‑25°C (59‑77°F).
