- SP Scientific VirTis 25L Genesis SQ EL-85 Stoppering Freeze Dryer Lyophilizer (100005011) with Wizard 2.0 Control System
- 4 Shelves with Stoppering
- Vacuum Pump (New)
- Attached Main Power Cable
- 90-Day Warranty
After its initial disinfection and inspection, our technicians tested the SP Scientific VirTis 25L Genesis SQ EL-85 stoppering freeze dryer with the following results:
- Calibrated temperature: PASSED
- Condenser temperature achieved -85°C: PASSED
- Shelf temperature achieved -70°C: PASSED
- Calibrated vacuum: PASSED
- Vacuum achieved 20mT: PASSED
- Reinsulated refrigeration lines.
- Installed new vacuum hoses.
- Added a new vacuum pump.
Shelf size (W x D): 10.8 in x 20.5 in (274.3 mm x 520.7 mm)
For an additional cost, we can provide software for plotting the performance data of your freeze dryer. This software is not included and must be purchased separately. Please contact us for more information.
|
Manufacturer
|
SP Scientific
|
|
Model
|
25L Genesis SQ EL-85
|
|
Part No.
|
100005011
|
|
Serial No.
|
308773
|
|
Mfg. date
|
2011
|
|
Shelf temperature control range
|
-55°C to 65°C
|
|
Lowest shelf temperature (50Hz/60Hz)
|
-67°C/-70°C
|
|
Lowest condenser temperature (50Hz/60Hz)
|
-82°C/-85°C
|
|
Maximum condenser capacity
|
25 liters
|
|
Condenser surface area
|
506 in2
|
|
Maximum ice condensing capacity in 24 hours
|
12 liters
|
|
Condenser pull-down from 20°C to -45°C
|
25 minutes or less
|
|
Shelf pull-down from 20°C to -40°C
|
30 minutes or less
|
|
Vacuum time to 100 millitorr
|
20 minutes or less
|
|
Lowest system vacuum
|
15 mT or less
|
|
Temperature uniformity
|
± 1.0°C
|
|
Power rating
|
208/230V, 60Hz, 30A, 1Ph
|
|
Dimensions (W x D x H)
|
40 x 30 x 79 in
|
|
Weight
|
800 lb (362.9 kg)
|
|
Minimum clearance on all sides
|
10 inches
|
Note: Performance specifications are based on SP Scientific test data from units operating at an ambient room temperature of approximately 20°C. SP recommends an optimum operating range of 15-25°C (59-77°F).
Note: SP Scientific recommends a 24-inch (61 cm) clearance around all sides of the unit for serviceability. If machines are placed side by side, increase the minimum clearance to 48 inches (121.9 cm)
