Thermo Scientific Sorvall RC 3BP+ Low-Speed Floor Centrifuge

Overview of Thermo Scientific Sorvall RC3BP Plus Low-Speed Floor Centrifuge

The Thermo Scientific Sorvall RC3BP Plus is a large capacity, versatile, quiet and reliable centrifuge for low speed (to 6000 rpm) work designed to meet the needs of research and clinical laboratories, blood banks and plasmapheresis centers. The cooling system is designed to maintain chamber temperature to within 3°C of setpoint. 

View in stock used floor centrifuge for sale here. Need assistance? Get in touch with us today.

Thermo Scientific Sorvall RC3BP Plus Floor Centrifuge Features

Here are the key features of a Thermo Scientific Sorvall RC3BP Plus:

•  Precise: The RC3BP Plus is equipped with Accumulated Centrifugal EffectTM (ACE), step-run and slow start/stop modes – ensure that the Sorvall RC3BP Plus centrifuge delivers precise, reproducible separations, run after run.  

•  Comfort: The RC3BP Plus has low deck height, quiet operation, minimal heat output, and increased refrigeration efficiency. An automatic lid-latch system also protects users and makes opening and closing the centrifuge effortless.  

•  Safe: The floor centrifuge is equipped with the following safety features: a protective armor plate steel guard within the cabinet; automatic shutoff of the drive motor for overspeed protection; circuit breakers on the main power and the control panel circuits; and a door interlock which prevents starting the drive while the chamber door is open, or opening the door while the rotor is in motion.

Thermo Sorvall RC3BP Plus Floor Centrifuge Specifications

Our Testing Process

1. Centrifuge technician pre-tests the unit’s (1) speed sometimes to maximum speed for a few minutes, (2) refrigeration (if equipped), (3) spinning if they spin up and spin down properly, (4) checks the buttons, switches, timers if they are all working. Necessary parts for repair are ordered.

2. Once any parts come in for the unit, or they’re working, the centrifuge technician performs any necessary repairs.

3. The centrifuge technician runs the unit to maximum RPMs for a minimum of 1 hour while observing the refrigeration performance (if applicable). During this step, loud/unusual noises, smells, and extra heat build up are observed.

4. The centrifuge technician also observes the proper performance of sensors like temperature, vacuum (if equipped), rotor sensors, tach sensors, latch sensors, etc.

5. After a full hour run, the centrifuge technician takes a photo of the centrifuge display to be shown in the listing photos on New Life Scientific’s e-commerce platforms.

6. The centrifuge technician then does a thorough look over throughout the centrifuge to identify anything that is missing, loose, or damaged. The centrifuge technician follows New Life Scientific’s Centrifuge Technician Checklist at this time to make sure everything is checked accordingly.

7. The refrigeration condenser and chassis cleaned are both handled by blowing out the unit with compressed air or dry ice blasting.

8. Sensors are cleaned and/or re-installed with proper gap. Electrical connections are latched and tightened down properly.

9. Drive mounts, drive brushes, gas springs are checked and replaced, if necessary.

10. The centrifuge is then cleaned and if needed, painted as well, to make sure the unit comes out as standard as we can.

NLS' Standard RC3BP PLUS Floor Centrifuge Upgrades and Accessories

•  Rotor
•  Rotor buckets
•  Rotor buckets adapters
•  Power cable
•  90-Day to 1-Year Warranty

Our Centrifuge Technician Checklist

At New Life Scientific, our technicians test each device thoroughly before shipping to verify performance and functionality. After our centrifuge technician finishes the initial testing process, this Centrifuge Technician Checklist is filled out to record the important information gathered throughout the repair process. This checklist will be available publicly after the unit has undergone tech completion. 

Thermo Sorvall RC3BP Plus High-Capacity Low-Speed Floor Centrifuge Applications

• Cell Biology and Biochemistry - The centrifuge is commonly used for harvesting cells from cultures in bioprocessing, cell culture studies, and in research applications. It aids in separating proteins from other cellular components in studies related to biochemistry. It also helps isolate and concentrate RNA or DNA from biological samples.

• Clinical and Diagnostic Applications - Widely used in clinical labs to process blood samples, separate plasma, serum, and blood cells for diagnostic testing. It is also used to separate and concentrate cells or particulate matter from urine and other bodily fluids.

• Bacterial and Yeast Cell Separation - In microbiology labs, the BIOS A centrifuge is used for separating bacterial or yeast cells from culture media for further analysis or storage.

• Environmental and Analytical Applications - It aids in the concentration of samples for monitoring environmental contaminants such • as heavy metals, pesticides, or pollutants in air and water samples.

• Cell Culture Harvesting - The centrifuge is used in the production of biopharmaceuticals where large-scale cell cultures need to be processed for the extractions of proteins, vaccines, or other therapeutic products.

• Research Applications - In labs that require the processing of large sample volumes, the centrifuge is ideal for high-throughput applications, such as drug development or genomics research.

• Toxicology Analysis - The centrifuge can be used in forensic labs to process biological fluids (such as blood, urine, or tissue samples) for toxicology testing, helping to identify drugs, toxins, or other substances.

Contact New Life Scientific Today for Additional Information

Our team can help you decide whether the RC3BP Plus’s capacity and features align with your processing needs. Contact us today if you have questions or need additional specifications. You may also:

• Live chat with us by clicking on the icon at the lower right of your screen.

• Email us at cs@newlifescientific.com

• Call us at (567)-210-2838