- Distek Evolution 6100 Bathless Dissolution System
- Calibration Probe
- x6 1-Liter Dissolution Vessels
- Heating Jackets
- Paddles
- Lids
The motor wires have been cut on this dissolution system. It cannot complete initialization because of this. The reason the motor wires were cut is unknown.
The screen and control panel appear fine. The internal circuit boards appear to be working as well. This system is in good physical condition overall except for the cut motor wires.
|
Manufacturer
|
Distek
|
|
Model
|
Evolution 6100
|
|
Dissolution vessels
|
Six standard/Up to seven vessels
|
|
Volume
|
500mL - 1000mL programmable
|
|
Vessel heating rate
|
Approx. 1.5°C per minute
|
|
RPM control range
|
25-300 RPM, digitally controlled, closed loop
|
|
Resolution
|
0.1 RPM
|
|
Accuracy
|
+/-0.2 RPM
|
|
Display
|
LED's, .75" (19mm) high
|
|
Motor
|
High torque, permanent magnet
|
|
Vessel temperature control
|
Independently controlled two-zone heater jackets
|
|
Display resolution
|
0.01°C
|
|
Accuracy
|
+/-0.25°C
|
|
Calibration
|
Built-in calibration probe
|
|
Shaft wobble
|
Less than 0.010" (0.254mm) total indicator runout
|
|
Program modes
|
Manual (Individual vessel control), Automatic (Up to 100 pre-programmed methods), External (produKEY Memory Device)
|
|
Interface ports
|
RS-232 (2), RS-485 (1), Parallel printer (1)
|
|
Power rating
|
115V, 50/60Hz, 15A
|
|
Dimensions (W x D x H)
|
26 x 20 x 39 in
|
|
Weight
|
150 lbs
|
