Microfluidics M-110EH-30 Microfluidizer Processor Homogenizer Pilot Scale 230V

- Microfluidics M-110EH-30 Microfluidizer Processor 230V (M110EH)
- H10Z 100 Micron Diamond Interaction Chamber (IXC)
- 2 Liter Stainless Steel Reservoir
- Manual Batch Counter
- External Product Heat Exchanger
- Digital Inlet/Outlet Temperature Gauge
- Digital Pressure Gauge
- External Drip Tray
- Preventive Maintenance Toolkit
- Attached Power Cable with NEMA L15-20 Plug
- 90-Day Warranty

Notice: We recommend the replacement of the IXC because it has approximately 20% wear.

After its initial disinfection and inspection, our technicians tested the Microfluidics M-110EH-30 microfluidizer processor with the following results: 

- Verify highest pressure ran 30,000 psi: PASSED
- Cleaned/inspected liquid end and hydraulic end: PASSED
- Ran/sterilized with 4 liters of isopropyl alcohol: PASSED
- Check process pressure control valve: PASSED
- Check motor start/stop control: PASSED
- Check pressurized air inlet assembly: PASSED
- Check hydraulic oil heat exchanger: PASSED
- Check/replace plunger seal assembly: PASSED
- Clean and inspect plunger: PASSED
- Cleaned and inspect bearing isolator/Orings: PASSED
- Clean and inspect/replace high pressure fittings: PASSED
- Clean and inspect/replace inlet check valve: PASSED
- Check/replace hydraulic oil and filter: PASSED
- Clean the hydraulic oil reservoir: PASSED
- Clean hydraulic oil suction strainer: PASSED
- Inspect/replace hydraulic cylinder seals: PASSED
- Inspect/replace pneumatic switches: PASSED
- Backflush the interaction chamber: PASSED

Notice: Please review the technician checklist in the product images to see more details of the inspection and testing performed.