Overview of Beckman Coulter Avanti J-20 XP Floor Centrifuge
The Avanti J-20 XP is a refrigerated centrifuge that generates centrifugal forces designed for routine processing, rapid sedimentation of protein precipitates, large particles, and cell debris, nucleic acid precipitation, virus and bacteria isolation, and more. The Avanti J-26S XP boasts its features like a brushless switched-reluctance drive motor, an automatic rotor identification system, Friction Reduction System, vacuum control circuitry, and temperature control system with automatic temperature compensation unique for each compatible rotor.
View in stock used floor centrifuge for sale here. Need assistance? Get in touch with us today.
Beckman Coulter Avanti J-20 XP Features
Here are the key features of a Beckman Coulter Avanti J-20 XP:
• Capacity: The Avanti J-20 XP can handle different volumes depending on the rotor with 6 Liters being the maximum capacity. It is compatible with the wide variety of Beckman Coulters JLA, JA, and JS type rotors.
• Specifications: The Avanti J-20 XP’s maximum speed is at 26,000 rpm with a maximum g-force (centrifuge force) of 82,000 x g when using JA 30.50 Ti Rotor. Its set temperature ranges from -10°C to +40°C in 1 degree increments. While its ambient temperature ranges from 16°C to 38°C (60°F to 100°F).
• Safety: The Avanti J-20 XP has been tested to operate safely indoors at altitudes up to 2000 meters (6562 ft). Its door has an electromechanical door-locking mechanism to prevent contact with a spinning rotor. If power outage occurs, the door can be manually unlocked to recover samples. It also has an automatic rotor identification system as well as an imbalance detector that monitors if rotor loads are severely out of balance.
• Friction Reduction System (FRS): The Avanti J-20 XP has a friction reduction system (FRS) that uses a mechanical rotary vane vacuum pump to reduce chamber pressure. The pump turns on after the run is started, before rotor friction reaches a high level. When the required vacuum level is reached, the pump turns off.
Beckman Coulter Avanti J-20 XP Floor Centrifuge Specifications
|
Manufacturer |
|
|
Model |
Avanti J-20 XP |
|
Max. speed |
26,000 rpm |
|
Max. RCF |
82,000 × g (JA 30.50 Ti Rotor) |
|
Speed control |
0-10,000 rpm: +/- 10 rpm 10,000-26,000 rpm: +/- 0.1% or equal |
|
Refrigerant |
R404A (Non CFC) |
|
Maximum capacity |
6 Liters |
|
Single tube vol. range |
1.5 mL - 1,000 mL |
|
Set temperature range |
-10° C to 40° C |
|
Temperature control |
± 2° C |
|
User programs |
30 programs, 2 steps (“I” version only) |
|
Friction reduction system |
Automatic |
|
Max. heat dissipation to room |
2.0 kw, 7,500 Btu/hr. |
|
Noise level |
57 dbA (0.91 M (3 ft.) in front of instrument at 20,000 rpm |
|
Power rating |
200/208/240V, 50/60 Hz, 24A |
|
Dimensions (W x D x H) |
28 x 33.5 x 45.5 in |
|
Weight |
639.4 lb (290 kg) |
Our Centrifuge Testing Process
To assure the highest quality and that we can offer a fair warranty on our products, our technicians put every product through rigorous testing:
1. The centrifuge technician pre-tests the unit’s speed, sometimes to maximum speed for a few minutes, refrigeration, whether it spins up and spins down properly, buttons, switches and timers. The technician also orders the necessary parts for repair.
2. Once the unit’s parts arrive or are working, the centrifuge technician performs any necessary repairs.
3. The centrifuge technician runs the unit to maximum RPMs for a minimum of 1 hour while observing the refrigeration performance (if applicable). During this step, loud/unusual noises, smells, and extra heat build up are observed.
4. The centrifuge technician also observes the proper performance of sensors like temperature, vacuum (if equipped), rotor sensors, tach sensors, latch sensors, etc.
5. After a full hour's run, the centrifuge technician takes a photo of the centrifuge display to be shown in the listing photos on New Life Scientific’s e-commerce platforms.
6. The centrifuge technician then thoroughly inspects the centrifuge to identify anything missing, loose, or damaged. At this time, the centrifuge technician follows New Life Scientific’s Centrifuge Technician Checklist to ensure everything is checked accordingly.
7. The refrigeration condenser and chassis are cleaned by blowing out the unit with compressed air or dry ice blasting.
8. Sensors are cleaned and/or reinstalled with the proper gap. Electrical connections are latched and tightened down properly, ensuring they have a proper power cable.
9. Drive mounts, drive brushes, gas springs are checked and replaced, if necessary.
10. The centrifuge is then cleaned and if needed, painted as well, to make sure the unit comes out as standard as we can.
Our Centrifuge Technician Checklist
At New Life Scientific, our technicians test each device thoroughly before shipping to verify performance and functionality. After our centrifuge technician finishes the initial testing process, this Centrifuge Technician Checklist is filled out to record the important information gathered throughout the repair process. This checklist will be available publicly after the unit has undergone tech completion.
Beckman Coulter Avanti J-20 XP Floor Centrifuge Applications
Beckman Coulter Avanti J-20 XP Floor Centrifuges are suitable for a range of applications:
• Cell Biology and Biochemistry - The centrifuge is commonly used for harvesting cells from cultures in bioprocessing, cell culture studies, and in research applications. It aids in separating proteins from other cellular components in studies related to biochemistry. It also helps isolate and concentrate RNA or DNA from biological samples.
• Clinical and Diagnostic Applications - Widely used in clinical labs to process blood samples, separate plasma, serum, and blood cells for diagnostic testing. It is also used to separate and concentrate cells or particulate matter from urine and other bodily fluids.
• Environmental and Analytical Applications - It aids in the concentration of samples for monitoring environmental contaminants such • as heavy metals, pesticides, or pollutants in air and water samples.
• Cell Culture Harvesting - The centrifuge is used in the production of biopharmaceuticals where large-scale cell cultures need to be processed for the extractions of proteins, vaccines, or other therapeutic products.
• Research Applications - In labs that require the processing of large sample volumes, the centrifuge is ideal for high-throughput applications, such as drug development or genomics research.
• Toxicology Analysis - The centrifuge can be used in forensic labs to process biological fluids (such as blood, urine, or tissue samples) for toxicology testing, helping to identify drugs, toxins, or other substances.
Contact New Life Scientific Today for Additional Information
Our team can help you decide whether the Avanti J-20 XP’s capacity and features align with your processing needs. Contact us today if you have questions or need additional specifications. You may also:
• Live chat with us by clicking on the icon at the lower right of your screen.
• Email us at cs@newlifescientific.com
• Call us at (567)-210-2838
Estimate Shipping
Beckman Avanti J-20 XP High-Speed Refrigerated Floor Centrifuge
Overview of Beckman Coulter Avanti J-20 XP Floor Centrifuge
The Avanti J-20 XP is a refrigerated centrifuge that generates centrifugal forces designed for routine processing, rapid sedimentation of protein precipitates, large particles, and cell debris, nucleic acid precipitation, virus and bacteria isolation, and more. The Avanti J-26S XP boasts its features like a brushless switched-reluctance drive motor, an automatic rotor identification system, Friction Reduction System, vacuum control circuitry, and temperature control system with automatic temperature compensation unique for each compatible rotor.
View in stock used floor centrifuge for sale here. Need assistance? Get in touch with us today.
Beckman Coulter Avanti J-20 XP Features
Here are the key features of a Beckman Coulter Avanti J-20 XP:
• Capacity: The Avanti J-20 XP can handle different volumes depending on the rotor with 6 Liters being the maximum capacity. It is compatible with the wide variety of Beckman Coulters JLA, JA, and JS type rotors.
• Specifications: The Avanti J-20 XP’s maximum speed is at 26,000 rpm with a maximum g-force (centrifuge force) of 82,000 x g when using JA 30.50 Ti Rotor. Its set temperature ranges from -10°C to +40°C in 1 degree increments. While its ambient temperature ranges from 16°C to 38°C (60°F to 100°F).
• Safety: The Avanti J-20 XP has been tested to operate safely indoors at altitudes up to 2000 meters (6562 ft). Its door has an electromechanical door-locking mechanism to prevent contact with a spinning rotor. If power outage occurs, the door can be manually unlocked to recover samples. It also has an automatic rotor identification system as well as an imbalance detector that monitors if rotor loads are severely out of balance.
• Friction Reduction System (FRS): The Avanti J-20 XP has a friction reduction system (FRS) that uses a mechanical rotary vane vacuum pump to reduce chamber pressure. The pump turns on after the run is started, before rotor friction reaches a high level. When the required vacuum level is reached, the pump turns off.
Beckman Coulter Avanti J-20 XP Floor Centrifuge Specifications
|
Manufacturer |
|
|
Model |
Avanti J-20 XP |
|
Max. speed |
26,000 rpm |
|
Max. RCF |
82,000 × g (JA 30.50 Ti Rotor) |
|
Speed control |
0-10,000 rpm: +/- 10 rpm 10,000-26,000 rpm: +/- 0.1% or equal |
|
Refrigerant |
R404A (Non CFC) |
|
Maximum capacity |
6 Liters |
|
Single tube vol. range |
1.5 mL - 1,000 mL |
|
Set temperature range |
-10° C to 40° C |
|
Temperature control |
± 2° C |
|
User programs |
30 programs, 2 steps (“I” version only) |
|
Friction reduction system |
Automatic |
|
Max. heat dissipation to room |
2.0 kw, 7,500 Btu/hr. |
|
Noise level |
57 dbA (0.91 M (3 ft.) in front of instrument at 20,000 rpm |
|
Power rating |
200/208/240V, 50/60 Hz, 24A |
|
Dimensions (W x D x H) |
28 x 33.5 x 45.5 in |
|
Weight |
639.4 lb (290 kg) |
Our Centrifuge Testing Process
To assure the highest quality and that we can offer a fair warranty on our products, our technicians put every product through rigorous testing:
1. The centrifuge technician pre-tests the unit’s speed, sometimes to maximum speed for a few minutes, refrigeration, whether it spins up and spins down properly, buttons, switches and timers. The technician also orders the necessary parts for repair.
2. Once the unit’s parts arrive or are working, the centrifuge technician performs any necessary repairs.
3. The centrifuge technician runs the unit to maximum RPMs for a minimum of 1 hour while observing the refrigeration performance (if applicable). During this step, loud/unusual noises, smells, and extra heat build up are observed.
4. The centrifuge technician also observes the proper performance of sensors like temperature, vacuum (if equipped), rotor sensors, tach sensors, latch sensors, etc.
5. After a full hour's run, the centrifuge technician takes a photo of the centrifuge display to be shown in the listing photos on New Life Scientific’s e-commerce platforms.
6. The centrifuge technician then thoroughly inspects the centrifuge to identify anything missing, loose, or damaged. At this time, the centrifuge technician follows New Life Scientific’s Centrifuge Technician Checklist to ensure everything is checked accordingly.
7. The refrigeration condenser and chassis are cleaned by blowing out the unit with compressed air or dry ice blasting.
8. Sensors are cleaned and/or reinstalled with the proper gap. Electrical connections are latched and tightened down properly, ensuring they have a proper power cable.
9. Drive mounts, drive brushes, gas springs are checked and replaced, if necessary.
10. The centrifuge is then cleaned and if needed, painted as well, to make sure the unit comes out as standard as we can.
Our Centrifuge Technician Checklist
At New Life Scientific, our technicians test each device thoroughly before shipping to verify performance and functionality. After our centrifuge technician finishes the initial testing process, this Centrifuge Technician Checklist is filled out to record the important information gathered throughout the repair process. This checklist will be available publicly after the unit has undergone tech completion.
Beckman Coulter Avanti J-20 XP Floor Centrifuge Applications
Beckman Coulter Avanti J-20 XP Floor Centrifuges are suitable for a range of applications:
• Cell Biology and Biochemistry - The centrifuge is commonly used for harvesting cells from cultures in bioprocessing, cell culture studies, and in research applications. It aids in separating proteins from other cellular components in studies related to biochemistry. It also helps isolate and concentrate RNA or DNA from biological samples.
• Clinical and Diagnostic Applications - Widely used in clinical labs to process blood samples, separate plasma, serum, and blood cells for diagnostic testing. It is also used to separate and concentrate cells or particulate matter from urine and other bodily fluids.
• Environmental and Analytical Applications - It aids in the concentration of samples for monitoring environmental contaminants such • as heavy metals, pesticides, or pollutants in air and water samples.
• Cell Culture Harvesting - The centrifuge is used in the production of biopharmaceuticals where large-scale cell cultures need to be processed for the extractions of proteins, vaccines, or other therapeutic products.
• Research Applications - In labs that require the processing of large sample volumes, the centrifuge is ideal for high-throughput applications, such as drug development or genomics research.
• Toxicology Analysis - The centrifuge can be used in forensic labs to process biological fluids (such as blood, urine, or tissue samples) for toxicology testing, helping to identify drugs, toxins, or other substances.
Contact New Life Scientific Today for Additional Information
Our team can help you decide whether the Avanti J-20 XP’s capacity and features align with your processing needs. Contact us today if you have questions or need additional specifications. You may also:
• Live chat with us by clicking on the icon at the lower right of your screen.
• Email us at cs@newlifescientific.com
• Call us at (567)-210-2838
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
READY TO BUY OR SELL USED LAB EQUIPMENT?
We can help. In addition to selling lab equipment, we also purchase it.
Contact us below for immediate service.