- SP Scientific VirTis 50L Ultra EL-85° Standard Configuration Stoppering Freeze Dryer Pilot Lyophilizer 208-230V (100029819)
- Wizard 2.0 Controller
- x15 Shelves with Stoppering
- Edwards 15i Dry Scroll Vacuum Pump
- Attached Power Cable with NEMA SS2-50P Plug
- 90-Day Warranty
Notice: This freeze dryer is water cooled. You will need to meet this utility requirement to operate this freeze dryer.
After its initial disinfection and inspection, our technicians tested the SP Scientific VirTis 50L Ultra EL-85° standard configuration freeze dryer with the following results:
- Lowest shelf temperature reached -74°C: PASSED
- Lowest condenser temperature reached -85°C: PASSED
- Lowest vacuum reached 15 mT: PASSED
- Inspected and replaced refrigeration line insulation as needed.
- Inspected and replaced vacuum hoses as needed.
- 1 Year Extended Warranty
- Annual PM Service Visit: Preventative maintenance involves checking vacuum integrity and instrument calibration
- IQ/OQ Service: Installation Qualification and Operational Qualification Service Visit. This can be a requirement for any company that is producing products that fall under FDA Regulations.
- Acid Trap Installation: Necessary for applications that involve the processing of corrosive materials
Please contact us if you would like to know more about these service upgrades.
Shelf size (W x D): 10.8 in x 20.5 in (274.3 mm x 520.7 mm)
Shelf area: 22.96 ft2 (21,331 cm2)
Shelf clearance (approximate): 1.97 in (50 mm)
|
Manufacturer
|
SP Scientific
|
|
Model
|
50L Ultra EL-85°
|
|
Part No.
|
100029819
|
|
Serial No.
|
329080
|
|
Lowest shelf temperature (50Hz / 60Hz)
|
≤ -67°C / -70°C
|
|
Shelf temperature control range
|
-55 to 65°C
|
|
Shelf pull-down from 20°C to -40°C
|
≤ 40 minutes
|
|
Lowest condenser temperature (50Hz / 60 Hz)
|
≤ -82°C / -85°C
|
|
Maximum condenser capacity
|
≥ 50 L
|
|
Condenser surface area
|
10 ft2 (.93 m2)
|
|
Condenser pull-down from 20°C to -45°C
|
≤ 35 minutes
|
|
Maximum ice condensing capacity in 24 hours
|
≥ 20 L
|
|
Maximum deposition rate
|
≥ 0.83 L/hour
|
|
Number of compressors
|
2
|
|
Compressor horsepower
|
3.5 hp, 1.5 hp
|
|
Vacuum time to 100 mTorr
|
≤ 45 minutes
|
|
Vacuum rate of rise
|
≤ 30 mT/hour
|
|
Vacuum control +/- 5 mTorr
|
50mTorr to 500mTorr
|
|
Volume-based leak rate
|
≤ .0042 mbar L/sec
|
|
Lowest system vacuum
|
≤ 15 mT
|
|
Temperature uniformity
|
± 1.0°C
|
|
Plug type
|
NEMA SS2-50P
|
|
Electrical requirements
|
208-230V, 60Hz, 50A, 1Ph
|
Note: Performance specifications are based on SP test data from units operating at an ambient room temperature of approximately 20°C. SP recommends an optimum operation range of 15-25°C (59-77°F).
|
Water-Cooled
|
|
Compressed air (for units with isolation valve)
|
80 psig (5.5 bar)
|
|
Ambient room temperature
|
15-25°C (59-77°F)
|
|
Approx. peak room heat generated
|
5,400 BTU/h (1.6 kW)
|
|
Cooling water usage
|
2-5 gpm (8-19 Lpm)
|
|
Cooling water load
|
17,500 BTU/h (5.1 kW)
|
|
Voltage
|
208-230V, 60Hz, 50A, 1Ph
|
|
Gas 1
|
Gas 2
|
|
F gas
|
R407C
|
R508B
|
|
Charge (Kg)
|
1.245
|
0.970 (AC); 0.452 (WC)
|
|
GWP
|
1774
|
13396
|
|
EPA SNAP
|
IP/VLTR
|
IPR/VLTR
|
|
Safety Class
|
A1
|
A1
|
|
Total CO2e (t)
|
15.198 (AC); 8.264 (WC)
|
15.198 (AC); 8.264 (WC)
|
|
Standard Configuration
|
|
Width
|
25 in (64 cm)
|
|
Depth
|
78 in (198 cm)
|
|
Height
|
75.75 in (192 cm)
|
|
Max. weight
|
2,000 lb (909 kg)
|
|
Min. clearance
|
10 in (25.4 cm)
|
Note: SP recommends a 24-inch (61 cm) clearance around all sides of the unit for serviceability. If machines are placed side by side, increase the minimum clearance to 48 inches (121.9 cm)
|
Construction
|
316L stainless steel shelves, product chamber and condenser chamber
|
|
Stoppering
|
Bottom-up hydraulic
|
|
Defrost type
|
Hot gas
|
|
Refrigerant type
|
CFC-free
|
|
Vapor port
|
8 in (20.3 cm)
|
Lower Costs: Save 30%–70% off standard retail prices on fully tested, pre-owned instruments.
Quality Equipment: Work with confidence knowing every instrument undergoes thorough testing for real-world lab environments.
Faster Delivery: Minimize downtime with in-stock inventory ready to ship immediately following a final quality inspection.
Dedicated Support: Experience customer service with guaranteed responses within one business day and full after-sale support.
Warranty Options: Purchase securely with warranty protection included on all equipment.